Power On/Off; Main Display; Image Capture - Triplett IRTC600 User Manual

Operation

POWER ON/OFF

seconds to turn the Thermal Imaging on or off.

Main Display

After powering on the power, open the lens protection
cover, the screen shows the thermal imaging status.
**Note: Time adjustment may be required when you move the
camera between environments with widely varying ambient temperatures.
Visible, Fused and Thermal Image Modes
Switching between infrared thermal image and visible image
thermal images and visible images (the degree of fusion is 0%, 25%, 50%,
75% and 100%)
Find Quality Products Online at:
GlobalTestSupply
www.
Maximum and Minimum Temperature
Display
The highest/ and lowest temperature is shown at the bottom
of the screen over the image
between displaying and hiding this information.

Image capture

Quick pull of the image capture trigger to capture.
When the capture is successful, the screen will
save the image,
SELECT/ENTER button. The image will be
stored. If you do not want to save the image you
can select No and the image will be deleted.
.com
sales@GlobalTestSupply.com
will toggle
to
and press the