Baroness FS900 Owner's Operating Manual
  1. Manuals
  2. Brands
  3. Baroness Manuals
  4. Blower
  5. FS900
  6. Owner's operating manual

Baroness FS900 Owner's Operating Manual

Riding sweeper
Hide thumbs Also See for FS900:
Table of Contents

Advertisement

Quick Links

Download this manual
Riding Sweeper
Owner's Operating Manual
Serial No.
FS900：11159-
"Required reading"
Read this manual before using the machine.
Original Instructions Ver.2.5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FS900 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Baroness FS900

Summary of Contents for Baroness FS900

  • Page 1 Riding Sweeper Owner's Operating Manual Serial No. FS900：11159- "Required reading" Read this manual before using the machine. Original Instructions Ver.2.5...
  • Page 2 FS900 Greeting Thank you for purchasing the Baroness product. QR Code This manual describes the proper handling, adjustment, and inspection of your product. A QR code label is affixed on the machine. We hope you will use the product safely, and take advantage of its best performance.
  • Page 3 The operator is responsible for operating the product properly and safely. Maintenance service for this machine should be performed by a mechanic with expertise. If you have any questions concerning maintenance or genuine parts, please contact a Baroness dealer or Kyoeisha.
  • Page 4 When replacing parts, be sure to use genuine Baroness parts or parts designated by Kyoeisha. Note that the Baroness product warranty may not apply to defects caused by the use of parts from other companies. Prior to use, carefully read the following manuals to thoroughly understand the contents for safe and correct operation.

  • Page 5: Table Of Contents

    FS900 Contents Safety .............. Page 1-1 Lubrication ............. Page 6-6 Adjustment and Replacement ......Page 6-7 Safe Operating Practices .......Page 1-2 Storage ............Page 6-20 Disposal ............Page 2-1 Repair ..............Page 7-1 Recycle and Waste Disposal ......Page 2-2 Precautions for Repair ........Page 7-2 Product Overview ..........
  • Page 6 FS900 Contents...

  • Page 7: Safety

    FS900 Safety Safe Operating Practices ...... Page 1-2 Training ..........Page 1-2 Preparation ..........Page 1-2 Operation ..........Page 1-3 Maintenance .......... Page 1-4 Storage ..........Page 1-4 Page 1-1...

  • Page 8: Safe Operating Practices

    FS900 Safety Failure to adequately follow these safety Never allow children or people unfamiliar precautions may cause an accident resulting in with these instructions to use or service the injury or death. machine. Local regulations may restrict the age of the...

  • Page 9: Operation

    FS900 Safety If fuel is spilled, do not attempt to start the Slow down and use caution when making engine but move the machine away from turns and crossing roads and sidewalks. the area of spillage and avoid creating any...

  • Page 10: Maintenance

    FS900 Safety Reduce the throttle setting during engine Keep hands and feet away from moving run-out. parts. If possible, do not make adjustments with the Take care when loading or unloading the engine running. machine into a trailer or a truck.
  • Page 11 FS900 Safety Never store the equipment with fuel in the tank inside a building where fumes may reach an open flame or spark. If the engine is provided with a shut-off valve, shut off valve while storing or transporting. Do not store fuel near flames.
  • Page 12 FS900 Safety Page 1-6 Safe Operating Practices...

  • Page 13: Disposal

    FS900 Disposal Recycle and Waste Disposal ....Page 2-2 About Recycle ........Page 2-2 About Waste Disposal ......Page 2-2 Page 2-1...

  • Page 14: Recycle And Waste Disposal

    FS900 Disposal Recycle and Waste Disposal About Recycle Recycling battery etc. is recommended for environmental conservation and economical use of resources. It may be required by local laws. About Waste Disposal Make sure that waste generated when servicing or repairing the machine is disposed of in accordance with local regulations.

  • Page 15: Product Overview

    FS900 Product Overview Specifications ........Page 3-2 Specifications .........Page 3-2 Sound Pressure Level ......Page 3-3 Sound Power Level ....... Page 3-3 Vibration Level ........Page 3-3 Carbon Dioxide (CO2) Emissions ..Page 3-3 Names of Each Section ......Page 3-4 Regulation Decals ........Page 3-4...

  • Page 16: Specifications

    FS900 Product Overview Specifications Specifications Model FS900 Name Riding Sweeper Type Rubber tires Total length 257 cm 101.18 in Total width 177 cm 69.69 in Bucket Frame 148 cm 58.26 in Bottom of Dimensions discharge Total height opening (when 149 cm 58.66 in...

  • Page 17: Sound Pressure Level

    FS900 Product Overview Sound Pressure Level Sound pressure level This machine was confirmed to have a continuous A-weighted sound pressure level of 82 dB by measuring identical machines in accordance with the procedure specified in ISO5395-1:2013. Sound Power Level Sound Power Level...

  • Page 18: Names Of Each Section

    FS900 Product Overview Names of Each Section Regulation Decals Positions of Regulation Decals 5 12 5C36C5B2 Names of Each Section_001 3742EF74 Handle Positions of Regulation Decals_001 Traveling pedal Serial number plate Brush rotation lever Specification decal Brush up/down lever UKCA mark...

  • Page 19: Regulation Decals

    FS900 Product Overview Description of Regulation Decals UKCA Mark Serial Number Plate (For UK) UKCA mark indicates that the machine sold in The serial number plate indicates the model the UK complies with the UK requirements. and serial number of the machine.

  • Page 20: Safety Signs And Instruction Signs

    If they are damaged, become dirty, or peel off, replace them with new ones. Part numbers for decals that need to be replaced are listed in the parts catalog. Order them from a Baroness dealer or Kyoeisha. 2z2dxu-001 Positions of Safety Decals and Instruction...

  • Page 21: Description Of Safety Decals And Instruction Decals

    FS900 Product Overview 　 Operation decal Warning Operation decal Lead-free gasoline decal Do not raise or lower the bucket while Fire prohibited decal obstacles, such as people or animals, are in Locking attention decal the operating area. Caution for high temperatures decal...
  • Page 22 FS900 Product Overview 　 Operation Decal Danger Danger FS900--0514Z0 Rollover - Do not perform dumping in Decal, operation dangerous areas, such as near cliffs. 　 Caution Caution for flying object - When the brushes are rotating, keep away from the machine.
  • Page 23 FS900 Product Overview Fire Prohibited Decal Caution for High Temperatures Decal K4205001940 K4205001920 Decal, fire prohibited Decal, caution for high temperatures Warning Caution Keep away from fire. High temperature - Do not touch. Otherwise, you will get burned. r653fo-001 xekv4l-001...
  • Page 24 FS900 Product Overview Hydraulic Oil Icon Falling Down Warning Decal K4209000980 K4205002320 Hydraulic oil icon DECAL, WARNING FALLING DOWN Read the Owner's Operating Manual. Warning Do not raise the bucket on soft ground, an uneven surface or a slope. Otherwise, the main vehicle will become unbalanced and fall down.

  • Page 25: Operation Decals

    FS900 Product Overview Operation Decals Positions of Operation Decals BUCKET FULL BUCKET BUZZER FREE A0921C55 Positions of Operation Decals_005 LOCK Key switch mark Engine rotation mark 8zq6pd-055 Parking brake mark Positions of Operation Decals_001 Tilt steering mark Bucket buzzer mark...

  • Page 26: Description Of Operation Decals

    FS900 Product Overview Description of Operation Decals Parking Brake Mark Key Switch Mark Parking brake mark This indicates lock/release of the parking Key switch mark brake. It illustrates the position of the key switch. kgtxi7-004 rcyo1p-005 Parking Brake Mark_001 Key Switch Mark_001...
  • Page 27 FS900 Product Overview Bucket Buzzer Mark Brush Rotation Mark Bucket buzzer mark Brush rotation mark This indicates ON/OFF of bucket buzzer This indicates rotation/stop of the brush. function. BUCKET BUZZER ikiqmq-001 Bucket Buzzer Mark_001 Brush Up/Down Mark 6ntnq3-009 Brush up/down mark...
  • Page 28 FS900 Product Overview Bucket Open/Close Mark BRAKE Decal Bucket open/close mark K4203001450 This indicates open/close positions of the Decal, BRAKE bucket. This indicates brake. OPEN BRAKE 7elqr2-001 BRAKE Decal_001 FORWARD Decal CLOSE K4203001430 Decal, FORWARD This indicates forward travel. o6dmxe-002...
  • Page 29 FS900 Product Overview Stop Valve Operation Decal K4203001290 Stop valve operation decal It illustrates Stop/Open of the stop valve. 55wqhi-002 Stop Valve Operation Decal_001 Stop Open Operation Decals Page 3-15...
  • Page 30 FS900 Product Overview Page 3-16 Operation Decals...

  • Page 31: Description Of Functions

    FS900 Description of Functions Traveling Pedal ........Page 4-2 Brake Pedal ..........Page 4-2 Throttle Lever .........Page 4-2 Choke Lever ........... Page 4-3 Bucket Buzzer Switch ......Page 4-3 Brush Up/Down Lever ......Page 4-3 Brush Rotation Lever ......Page 4-4 Stop Valve ..........

  • Page 32: Traveling Pedal

    FS900 Description of Functions Traveling Pedal The traveling pedal is located in the right foot area. When depressed "Forward", the machine travels forward. When depressed "Backward", the machine travels in reverse. If the pedal is secured with the speed adjustment plate during operation, the machine can be operated at a constant speed.

  • Page 33: Choke Lever

    FS900 Description of Functions Choke Lever Bucket buzzer switch The choke lever is located on the left side below the steering wheel and its knob is to be pulled when starting the engine. Brush Up/Down Lever Pull the knob half way for restarting, as The brush up/down lever is located to the right necessary.

  • Page 34: Brush Rotation Lever

    FS900 Description of Functions Brush Rotation Lever Bucket Up/Down Lever The brush rotation lever is located to the right of Warning the driver's seat and is used when performing core collection and sweeping. Do not raise the bucket on soft ground, an uneven surface or a slope.

  • Page 35: Bucket Open/Close Lever

    FS900 Description of Functions The bucket up/down lever is located to the right Bucket Open/Close Lever of the driver's seat and is used when dumping collected material into a truck, etc. The bucket open/close lever is located to the When the bucket up/down lever is shifted to the right of the driver's seat and is used when "UP"...

  • Page 36: Roller Press Lever

    FS900 Description of Functions When the bucket open/close lever is shifted to Outrigger the "CLOSE" position, the bucket is closed. The outriggers are located behind the right and left wheels and used in the following cases. When using the outriggers, choose the appropriate position of hole for the purpose.

  • Page 37: Instruments On The Operation Panel

    FS900 Description of Functions Make sure that the outriggers are fixed and For storage: not in contact with the ground. Important When urethane tires are installed, storing the machine without the tires lifted off the ground will result in the tires becoming deformed.

  • Page 38: Angle Meter

    FS900 Description of Functions Hour Meter Safety Mechanisms The hour meter indicates the accumulated This machine features a safety device for operation time of the engine. starting/stopping the engine. The number in red figures on a white As for starting the engine, the safety device...

  • Page 39: Bucket Full Lamp

    FS900 Description of Functions Bucket FULL Lamp Warning When the bucket FULL lamp is turned on, immediately stop collecting work and discharge the collected materials in the bucket. If the collected amount in the bucket exceeds the defined amount, the machine may fall down when the bucket raised.
  • Page 40 FS900 Description of Functions Page 4-10 Warning Mechanisms...

  • Page 41: Handling Instructions

    FS900 Handling Instructions Operations Before Service ....Page 5-2 Procedure to Stop Engine ....Page 5-18 Parking and Stopping ......Page 5-18 Opening and Closing of Underseat Cover ............. Page 5-2 Leaving The Machine ......Page 5-18 Opening and Closing of Front Cover ..Page 5-2 Move ............Page 5-18...

  • Page 42: Operations Before Service

    FS900 Handling Instructions Opening and Closing of Front Cover Operations Before Service Opening and Closing of Underseat Cover Caution Do not open the front cover in strong winds. Caution Do not open the underseat cover in strong Caution winds. When closing the front cover, be careful not to pinch your hands.

  • Page 43: Raising And Lowering The Bucket

    FS900 Handling Instructions Stop the engine. Raising and Lowering The Bucket Important Warning Be sure to extend the outriggers on both sides. Do not raise the bucket on soft ground, an The outriggers increase stability of the main uneven surface or a slope.

  • Page 44: Removing And Installing The Brush Cover

    FS900 Handling Instructions [10] Insert the round head pin through the Lock the bucket with the cylinder lock. holes in the cylinder lock, and then install Disengage the left and right slide latches. the cotter pin to secure the cylinder lock.

  • Page 45: Inspection And Cleaning

    FS900 Handling Instructions Stop the engine. Inspection and Cleaning Secure the bucket position with the cylinder Bucket lock. Remove the brush cover. Inspection of Bucket Wash the inside of the rotary, inside of the The bucket may become damaged due to brush frame and the rollers with water.

  • Page 46: Roller

    FS900 Handling Instructions Make sure that protective covers are Roller installed in their appropriate positions. Inspection of Rollers Hydraulic Oil Bearing wear due to frequent use or bearing Inspection of Hydraulic Oil damage caused by water infiltration may prevent the roller from rotating smoothly.
  • Page 47 FS900 Handling Instructions Tighten the tank cap securely. Specified Hydraulic Oil Shell Tellus S2M46 ISO Viscosity Grade ISO VG46 0.873 g/cm Density 15 °C (59 °F) (0.0315 lb/in API Gravity 30.6 Flash Point (Open Cup) 230 °C (446 °F) Pour Point -30 °C (-22 °F)

  • Page 48: Hydraulic Hoses

    FS900 Handling Instructions Close the underseat cover. Hydraulic Hoses Cleaning of Air Cleaner Element Inspection of Hydraulic Hoses A contaminated air cleaner element may cause malfunction of the engine. Warning To maximize the life of the engine, clean the When checking the hydraulic circuit for air cleaner properly.

  • Page 49: Battery

    FS900 Handling Instructions Cleaning the exterior Important Use a wet cloth for cleaning. When cleaning the air cleaner element, do not Inspect the vent plugs or vent holes on the side of the battery, and if they are blocked use a petroleum solvent.
  • Page 50 FS900 Handling Instructions Inspecting the electrolyte level and refilling Danger Danger Warning When you supply battery fluid, wear protective Do not allow the battery fluid level to become garments and safety glasses, etc. lower than the LOWER LEVEL (minimum fluid level line).

  • Page 51: Electrical Wiring

    FS900 Handling Instructions Electrical Wiring Inspection of Parking Brake Inspection of Electrical Wiring Depress the locking pedal while firmly depressing the brake pedal to lock it and check that the brake is applied effectively. Important Firmly depress the brake pedal and release...

  • Page 52: Around The Engine

    FS900 Handling Instructions Position the machine so that the engine will Around The Engine be level, then insert the oil gauge all the way to check the oil level. Inspection of Engine-Associated Parts Caution Perform operations after the engine and other parts have sufficiently cooled.

  • Page 53: Fuel

    FS900 Handling Instructions Fuel Supply of Engine Oil Inspection of Fuel Quantity Important With the machine on a level surface, observe Do not fill too much engine oil. Otherwise, the the fuel gauge on the fuel tank to check the engine may be damaged.

  • Page 54: Fuel Filter

    FS900 Handling Instructions Open the underseat cover. Fuel tank Remove the filter pot, wash the filter and Fuel gauge inside of the filter pot using a solvent, such The fuel tank capacity up to the red ring of as a hardly flammable kerosene, and then blow compressed air to dry them.

  • Page 55: Adjustment Before Work

    FS900 Handling Instructions Bolts and Nuts Adjustment before Work Inspection of Bolts and Nuts Adjustment of Steering Wheel Position Important Warning Be sure to retighten the bolts and nuts, Since it is dangerous, do not adjust while because they may be loosened at the earlier traveling.

  • Page 56: Adjustment Of Seat Position

    FS900 Handling Instructions Stop the engine. Adjustment of Seat Position Shift the brush up/down lever to the "DOWN" position to lower the brush frame. Warning Since it is dangerous, do not adjust while traveling. Use the adjustment lever to adjust the seat position back and forth.

  • Page 57: Start/Stop Of Engine

    FS900 Handling Instructions Retaining pin Caution Locking pin Make sure that the covers are correctly in Brush adjusting handle place and are not damaged. Important Important Adjust the brush so that the left and right sides Starter operation must take 15 seconds or are even.

  • Page 58: Parking And Stopping

    FS900 Handling Instructions Make sure that the brush frame is raised. Procedure to Stop Engine Make sure that the stop valve is set to the Lower the bucket to its lowest position. "STOP" position. Raise the brush frame. Release the parking brake.

  • Page 59: Dumping Operation

    FS900 Handling Instructions Shift the throttle lever to the "High speed" Dumping Operation position, and rev up the engine to MAX. Warning Danger Danger Always set the bucket buzzer switch to the Do not perform dumping operation on slopes "ON" side.

  • Page 60: Transporting

    FS900 Handling Instructions When loading this machine into a trailer or a Caution truck to transport it, drive the machine in reverse. When unloading, drive the machine Do not raise and lower the bucket and do not forward. open and close the bucket lid while people or After loading or unloading, lower the bucket to obstacles are nearby.

  • Page 61: Maintenance

    FS900 Maintenance Precautions for Maintenance ....Page 6-2 Jacking Up The Machine .......Page 6-2 About Jacking Up The Machine .....Page 6-2 Jack-up Points ........Page 6-2 Greasing ..........Page 6-3 About Greasing ........Page 6-3 Greasing Points ........Page 6-3 Lubrication ..........Page 6-6 About Lubrication ........Page 6-6...

  • Page 62: Precautions For Maintenance

    First, learn well the operations you plan to perform. Important Use tools appropriate for each operation. Important Use Baroness genuine parts for replacement and accessories. Our product warranty may be void if you use non-genuine parts for replacement or accessories.

  • Page 63: Greasing

    FS900 Maintenance Right front brush frame mount area Greasing About Greasing Since there may be adhesion or damage due to lack of grease on moving parts, they must be greased. Add urea-based No. 2 grease in accordance with the Maintenance Schedule.
  • Page 64 FS900 Maintenance Flange bearing No. of There are three points on the left and right. Location Greasing 　 Right Points Traveling pedal fulcrum Brush frame fulcrum Flange bearing Upper connecting pipe Upper adjusting pipe Belt tension lever fulcrum (lower pulley...
  • Page 65 FS900 Maintenance Upper connecting pipe Brake pedal fulcrum There is one point each on the left and right. 8bq62b-085 8bq62b-082 Greasing Points_010 Pump neutral lever fulcrum (upper piston Greasing Points_007 Upper adjusting pipe pump) There is one point each on the left and right.

  • Page 66: Lubrication

    FS900 Maintenance Lower adjusting pipe Front wheel arm There is one point each on the left and right. 8bq62b-091 8bq62b-088 Greasing Points_016 Greasing Points_013 Lubrication Lower connecting pipe About Lubrication There is one point each on the left and right.

  • Page 67: Adjustment And Replacement

    FS900 Maintenance Brush frame up/down cylinder spherical No. of bearing 　 Location lubricating There is one point. points Bucket up/down cylinder spherical bearing Bucket lid open/close cylinder spherical bearing Brush frame up/down cylinder spherical bearing Bucket up/down cylinder spherical bearing There is one point each on the left and right.

  • Page 68: Replacement Of Tires

    FS900 Maintenance Replacement of Tires Change of Rear Tires Change of Front Tires Removing rear tires Follow the steps below to remove the rear Removing front tires tires: Follow the steps below to remove the front Loosen the bolts. tires: Loosen the bolts.

  • Page 69: Adjustment Of Belt Tension

    FS900 Maintenance Adjustment of Belt Tension Adjusting the Brush Belt Warning Important Be sure to stop the engine before adjusting If the brush belt is incorrectly adjusted, the the belts. brushes will not rotate properly. Move the machine to level ground.

  • Page 70: Adjustment Of Front Apron

    FS900 Maintenance Install the belt cover after adjustment. Adjustment of Front Apron Caution Be sure to stop the engine before adjusting the front apron. Important Check that the front apron and front apron gl5nez-002 adjusting plate are installed straight, with the Adjustment of Front Apron_002 left and right sides at the same height.

  • Page 71: Adjustment Of Brushes

    FS900 Maintenance Adjust the brush so that there is a clearance Adjustment of Brushes of approximately 5.0 mm (0.20 in) between its tip and the brush frame, and then Caution temporarily tighten the bolts. For maintenance service, raise the empty bucket.

  • Page 72: Change Of Brushes

    FS900 Maintenance Change of Brushes Bolt Brush Caution Remove the rotary brush. During maintenance service, raise the empty Install a new rotary brush. bucket. Important Evenly install the brush. Important If the brush operation height is inadequate, Adjust the brush so that there is a clearance cores will not be properly collected.

  • Page 73: Adjustment Of Rotary Plates

    FS900 Maintenance Adjust the rotary plate so that there is a Adjustment of Rotary Plates clearance of approximately 5.0 mm (0.20 in) between it and the brush frame, and then Caution temporarily tighten the bolts. For maintenance service, raise the empty bucket.

  • Page 74: Change Of Rotary Plates

    FS900 Maintenance Install a new rotary plate. Change of Rotary Plates Important Caution Evenly install the rotary plate. During maintenance service, raise the empty Adjust the rotary plate so that there is a bucket. clearance of approximately 5.0 mm (0.20 in)

  • Page 75: Change Of Hydraulic Oil

    FS900 Maintenance Remove the drain plug of the hydraulic Change of Hydraulic Oil tank, and then drain the old oil into a container. Caution Wind new sealing tape on the drain plug, Be careful with hot oil, which could cause and then attach it to the hydraulic tank.

  • Page 76: Change Of Hydraulic Oil Filter

    FS900 Maintenance Remove the old filter cartridge. Change of Hydraulic Oil Filter Change of Hydraulic Oil Line Filter Caution Be careful with hot oil, which could cause burns if it contacts your skin. Important When replacing the hydraulic oil filter, be sure...
  • Page 77 FS900 Maintenance Filter case Important O-ring Use Shell Tellus S2M46 (or equivalent) as hydraulic oil. Install the filter case onto the body, firmly hand-tighten it, and then tighten it to 25 to Remove the cover on the right side of the 35 N·m (254.93 - 356.90 kgf-cm).

  • Page 78: Change Of Air Cleaner Element

    FS900 Maintenance Wind new sealing tape on the drain plug, Change of Air Cleaner Element and then re-place it in the engine.. A contaminated air cleaner element may cause malfunction of the engine. To maximize the life of the engine, replace the air cleaner element at the appropriate times.

  • Page 79: Change Of Engine Oil Filter

    FS900 Maintenance Supply engine oil until it reaches the Change of Engine Oil Filter specified level. "Supply of Engine Oil" (Page 5-13) Caution Start the engine, and then stop it after 10 to Be careful with hot oil, which could cause 20 minutes.

  • Page 80: Storage

    FS900 Maintenance Storage Long-Term Storage Follow the instructions below for long-term storage of the machine. Cleaning Remove dirt, grass clippings, oil stains etc. ･ completely from the main vehicle and engine. Replacing oil Inspect and replace the engine oil, ･...

  • Page 81: Repair

    FS900 Repair Precautions for Repair ......Page 7-2 Adjustment and Replacement ....Page 7-2 Adjustment of Brake ......Page 7-2 Adjusting the Neutral Position of the Piston Pump .......... Page 7-3 Change of Fuse ........Page 7-4 Towing ............ Page 7-4 Towing the Machine in An Emergency ..........Page 7-4...

  • Page 82: Precautions For Repair

    Use tools appropriate for each operation. Brake lever Start the engine and drive to check the Important following. Use Baroness genuine parts for replacement Make sure that heat is not generated in ･ and accessories. the brake area. Our product warranty may be void if you use Make sure that the left and right brakes ･...

  • Page 83: Adjusting The Neutral Position Of The Piston Pump

    FS900 Repair Slowly rotate the camshaft until the rear Adjusting the Neutral Position of the Piston wheels stop, and then lock the camshaft with Pump the nut at the stopped position. Warning When adjusting the neutral position, exercise care so that the hand does not get entangled in the rotating parts.

  • Page 84: Towing

    FS900 Repair Fuses Push-pull cable Adjuster nuts Fuses are located in the lower right corner Pedal mount behind the front cover and consist of the main harness fuse for the entire circuit. Insert the push-pull cable, and then install It is a mini blade fuse 20 A.
  • Page 85 FS900 Repair Secure the rope to the front part of the Tighten the bolts to compress the unload frame. valve operating pins and open the unload valves. gay3t1-016 gay3t1-003 Towing the Machine in An Emergency_001 Towing the Machine in An Emergency_003...
  • Page 86 FS900 Repair Page 7-6 Towing...

  • Page 87: Appended Table

    FS900 Appended Table Tightening Torques ....... Page 8-2 Standard Tightening Torques ....Page 8-2 Principal Tightening Torques ....Page 8-5 Daily Check List ........Page 8-6 Maintenance Schedule ......Page 8-7 List of Adjusted Values ......Page 8-8 Page 8-1...

  • Page 88: Tightening Torques

    FS900 Appended Table Tightening Torques Important Refer to the Tightening Torque table. Note that the Baroness product warranty may not apply to defects caused by incorrect or overtorque tightening, etc. Standard Tightening Torques Bolts and Nuts Important A number of bolts are used in each part of this machine.
  • Page 89 FS900 Appended Table General bolt Strength classification 4.8 Nominal diameter tib3yb-001 kgf-cm lb-in 3 - 5 30.59 - 50.99 26.55 - 44.26 7 - 9 71.38 - 91.77 61.96 - 79.66 14 - 19 142.76 - 193.74 123.91 - 168.17 29 - 38 295.71 - 387.49...
  • Page 90 FS900 Appended Table Hydraulic Hose The tightening torques for union joints and union adaptors with parallel pipe threads (G, PF) are shown in the table below. A union joint or adaptor will not become loose or leak as long as it is tightened by the specified torque.

  • Page 91: Principal Tightening Torques

    FS900 Appended Table Principal Tightening Torques Tightening Torque by Model FS900 Tighten the following bolts and nuts at the torque specified in the table. For thread locking adhesive, apply a middle strength thread locker (ThreeBond 1322 or equivalent anaerobic sealant).

  • Page 92: Daily Check List

    FS900 Appended Table Daily Check List ●・・・Inspect, adjust, supply, clean (first time) ○・・・Inspect, adjust, supply, clean ▲・・・Replace (first time) △・・・Replace Maintenance Item Remarks Check engine oil ○ 　 　 Check fuel 　 ○ 　 　 Check air cleaner 　 ○...

  • Page 93: Maintenance Schedule

    FS900 Appended Table Maintenance Schedule FS900 ●・・・Inspect, adjust, supply, clean (first time) ○・・・Inspect, adjust, supply, clean ▲・・・Replace (first time) △・・・Replace Maintenance Item Remarks Air cleaner should be cleaned Clean air cleaner element more often in dusty conditions 　 　 ○ 　 　 　 　 　 　 　...

  • Page 94: List Of Adjusted Values

    FS900 Appended Table Maintenance Item Remarks Replace traveling cable 　 　 　 　 　 　 　 　 　 　 △ 　 Replace throttle wire 　 　 　 　 　 　 　 　 　 　 △ 　 　 Replace choke wire 　...
  • Page 95 1-26, Miyuki-cho, Toyokawa-city, Tel : +81 - 533 - 84 - 1390 Head Office Aichi-pref, 442-8530 JAPAN Fax : +81 - 533 - 84 - 1220 FS900---UM--GBZ/23D-00-S.K...

Table of Contents