Little Giant SELECT Series Owner's Manual page 8

MAINTENANCE
Cleaning Impeller and Volute
Periodic cleaning of the pump parts will prolong the life and
efficiency of the pump.
s
WARNING
!
1.
housing cover. Warranty is void if the motor housing cover,
impeller or seals have been removed.
2. Remove all debris (gravel, sand, floating debris, etc.)
from the sump basin.
3. Clean the impeller (4) and the volute passage (5).
Do not use strong solvents.
s
CAUTION
!
a.
Removal of the impeller requires special tools and is to be
done only by an authorized service center.
4. Be sure the impeller turns freely after cleaning.
CONNECTIONS FOR PUMP OPERATION
Manual Operation
Disconnect the pump cord from the float switch extension and plug it
directly into the GFCI outlet.
s
CAUTION
!
This type of operation should be used
only for emergency use or when a large volume of water is to be
pumped. Pump must not be allowed to run dry. If pump is run dry,
it may damage pump and void the warranty.
Automatic Operation
Plug the pump cord into the float switch extension. Plug the float
switch cord (with pump cord attached) into the GFCI outlet.
8
Do not remove the motor
Do not remove the impeller.
REPLACEMENT PARTS
Part No. Description
640171 Tethered Float Switch, Piggyback, 10'
640172 Tethered Float Switch, Piggyback, 20'
2
6
Manual
Operation
Item No.
6
6
1
3
5
4
Automatic
Operation