National Instruments DAQCard-6533 User Manual page 133

channel
CompactPCI
compiler
control signals
counter/timer
CPULL
current sinking
current sourcing
D
DAQ
Data In Valid
DC
default setting
© National Instruments Corporation
Pin or wire lead to which you apply or from which you read the analog or
digital signal. For digital signals, you group channels to form ports. Ports
usually consist of either four or eight digital channels.
Core specification defined by the PCI Industrial Computer Manufacturer's
Group (PICMG).
A software utility that converts a source program in a high-level
programming language, such as LabVIEW, Basic, C or Pascal, into an
object or compiled program in machine language. Compiled programs run
10 to 1,000 times faster than interpreted programs. Some languages, such
as Java, are compiled to an intermediate language that is interpreted at run
time.
Signals that regulate/control the timing of your data transfer in handshaking
I/O and pattern I/O. There are four control signals in your NI 653X: ACK
(STARTTRIG), REQ, STOPTRIG, and PCLK.
A circuit that counts external pulses or clock pulses (timing).
A user-configurable 2.2 kΩ internal resistor for control lines. You can
connect the line to +5 VDC (pull up) or connect the line to ground (pull
down).
The ability to dissipate current for analog or digital signals.
The ability to supply current for analog or digital signals.
Data Acquisition—Collecting and measuring electrical signals from
sensors, transducers, and test probes or fixtures and inputting them to a
computer for processing. Also refers to collecting and measuring the same
kinds of electrical signals with analog-to-digital and/or digital devices
plugged into a PC, and possibly generating control signals with
digital-to-analog and/or digital devices in the same PC.
Data generated by peripheral device that is ready for input to the NI 653X.
direct current
A default parameter value recorded in the driver. In many cases, the default
input of a control is a certain value (often 0) that means use the current
default setting.
G-3
Glossary
NI 653X User Manual