Advertisement
4-8. Magic Motion Remote Controller test
Required Equipment
- RF Remote Controller for test, IR-KEY-Code Remote
Controller for test
* You must confirm the battery power of Remote Controller
before test
(Recommend that change the battery per every lot)
(1) If you select the 'start key(Mute)' on the controller, you can
pairing with the TV SET.
(2) You can check the cursor on the TV Screen, when select
the 'OK Key' on the controller
(3) You must remove the pairing with the TV Set by select
'Vol+(STOP) Key' on the controller
4-9. 3D Function Test
Required Equipment
Pattern Generator : MSHG-600, MSPG-6100 [SUPPORT
O
HDMI1.4])
MODE : HDMI mode NO. 872
Pattern No.83
(1) Please input 3D test pattern like below (HDMI mode NO.
872 , pattern No.83)
(2) When 3D OSD appear automatically, then press OK button
on ADJ Remote Controller.
(3) Check the picture. The picture must be same as below.
(Don't have to wear 3D glasses.)
4-10. Check RF Emitter.
Required Equipment
- Pattern Generator : 3D-GT002, MSHG-600,
MSPG-6100 [SUPPORT HDMI1.4])
MODE : HDMI mode NO. 872
Pattern No.83
Copyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
(1) On 3D Mode, Check the picture like below.
(2) If RF Emitter is correctly working, you can see that the
lamp of RF tester turns on.
5. Set Information
(Serial No & Model name)
5-1. Check the serial number
& Model Name
(1) Push the menu button in DTV mode.
(2) Check the Serial Number
Select the STATION -> Diagnostics -> To set
6. SW Download Guide.
* Before put a *.epk to USB Stick make 'LG_DTV' folder in USB.
Then, put *.epk file to 'LG_DTV' folder and Turn on TV
(1) Put the USB Stick to the USB socket
(2) Automatically detecting update file in USB Stick
* If your downloaded program version in USB Stick is Low,
it didn't work.
But your downloaded version is High, USB data is
automatically detecting.
(3) Show the message "Copying files from memory"
(4) Updating is staring.
(5) Updating Completed, The TV will restart automatically.
After turn on TV, Please press 'IN-STOP' button on ADJ
Remote-control.
* IF you don't have ADJ R/C, enter 'Factory Reset' in
OPTION MENU.
(6) When TV turn on, check the Updated version on
Diagnostics MENU.
*After downloading, have to adjust TOOL OPTION again.
- 10 -
LGE Internal Use Only
Advertisement
