Time Based Drying - Minutes - Beko BWD 100 User Manual

To enable Bluetooth:
Press and hold the Remote Control
function button for 3 seconds. You will
see the countdown "3-2-1", and bluetooth
symbol will be displayed. Release the Remote
Control function button. The Bluetooth
icon will flash while the product is being paired
with the smart device. If the connection is
successful, the light of the icon will remain on.
To disable Bluetooth:
Press and hold the Remote Control
function button for 3 seconds. You
will see the countdown "3-2-1", and
bluetooth symbol will be disappear.
C
INFORMATION
• You must complete the first setup of
the HomeWhiz app for Bluetooth to be
enabled. After the setup, if you press the
Remote Control function button while the
button is in the Programme Download/
Remote Control position, the Bluetooth
connection will be enabled automatically.
5.12 Drying steps
5.12.1 Iron Dry
Drying continues until the drying
level reaches the Iron Dry step.
5.12.2 Cupboard Dry
Drying continues until the drying level
reaches the Cupboard Dry step.
5.12.3 Extra Dry
Drying continues until the drying level
reaches the Cupboard Extra Dry step.
C
INFORMATION
• The dryness level might change depending
on the mix of laundry, type of material,
amount and wetness level of the laundry.
• Do not use the machine to dry laundry that
contains lace, tulle, bling, beads, paillette,
wire etc. or laundry with high silk content.
30 / EN
-
-
-
-
/
/
/
5.12.4 Time based drying
- minutes /
You can select 30, 90 or 150 minutes
drying to reach the desired dryness
level at a low temperature.
C
INFORMATION
• When drying small amount of laundry
(2 pieces maximum), select the
timed drying steps in the Cottons or
Synthetics drying programmes.
• If the laundry has not reached the
desired dryness level at the end of the
drying programme, you can select
timed drying to end the process.
• When this function is selected, the
machine performs drying for the adjusted
time irrespective of the drying level.
5.13 Time display
While the programme is running, the time
remaining to the end of the programme will be
displayed in hours and minutes, e.g. "01:30".
C
INFORMATION
• Programme time may differ from the values
in section "Programme and consumption
table" depending on the water pressure,
water hardness and temperature, ambient
temperature, amount and the type of
laundry, auxiliary functions selected and
the changes in the mains voltage.
5.14 End Time
With the End Time function, start of
the programme can be delayed up to
24 hours. After pressing the End Time
button, the programme's estimated end
time will be displayed. If an End Time is
set, the End Time light will turn on.
To ensure that the End Time function is
enabled and the program ends at the end of
the defined duration, you should press Start
/ Pause after setting the duration. The Start/
Pause button will stop flashing and remain on.
-
Washer-Dryer / User's Manual