Table of Contents
Advertisement
Graphic/Text Option
The Graphic/Text option lets you switch between text and graphic display modes.
OSD Exit Option
Use the OSD Exit item to close the OSD menu.
Note:
1.
No Video
When the monitor is ON and there
is no Video signal received, the
following message will be
displayed.
2.
Signal out of monitor's supported range
Then the frequency range of the signal is out of the monitor's specifications, the
display will show messages in the following manner:
Case 1:
The incoming frame rate is higher
than 75Hz.
In this case, the screen display may
not be centered and a warning
message appears.
Case 2:
The incoming resolution is higher
than 1024x768.
In this case, the video data will be
turned off and a warning message
appears at center.
Press the Adjustment button to switch between the text and graphic
options.
The OSD will close by itself if left inactive.
10
Advertisement
Table of Contents
