DB Drive WDX G1 Series User Manual page 6

DVC WIRING CONFIGURATIONS
You can change the wiring configuration of your speakers ( Series, Parallel and Series / Parallel ) to match
the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or
multiple woofers in these three different wiring configurations will result in different impedance loads.
Series: Is the method of wiring of alternate positive with negative terminals ( string method )
( Illustration below ).
Parallel: Is the method of wiring where you wire match 2 speaker terminals with positive to positive
terminal and negative to negative. ( Illustration below ).
Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for
the terminal and parallel for the leads to amp. ( Illustration below ).
4Ω DVC WIRING CONFIGURATIONS
1 X 4Ω DVC
SUBWOOFER
4Ω
4Ω
3 X 4Ω DVC
SUBWOOFER
4Ω
4Ω
2 X 4Ω DVC
SUBWOOFER
4Ω
4Ω
2Ω
4Ω 4Ω
4Ω 4Ω
2.66Ω
4Ω
4Ω
4Ω
4 X 4Ω DVC
SUBWOOFER
4Ω 4Ω
4Ω 4Ω
6
2 X 4Ω DVC
SUBWOOFER
4Ω 4Ω
4Ω
1Ω
4Ω 4Ω
4Ω 4Ω
2Ω