Table of Contents
Advertisement
Available languages
Available languages
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service center authorized by
Panasonic for repair.
Problem
The power switch does
not turn ON.
Shavings fly out in all
directions.
System outer foil gets hot.
Operating time is short
even after charging.
The odor is getting
stronger.
The driving sound
changes while shaving.
ES-LT4N_ME.indb
15
Action
Unlock the switch lock.
(See page 9.)
This can be improved by cleaning
every time after shaving.
Clean the inner blades with the
brush when shavings are
adhering to the inner blades.
Apply oil.
(See page 13.)
Replace the system outer foil if it
is damaged or deformed.
(See page 14.)
Apply oil.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
This can be improved by cleaning
every time after shaving.
While the shaving sensor lamp
glows, the shaving sensor is
operating. The sound changes
depending on the beard thickness.
Problem
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
You do not get as close a
and inner blades:
shave as before.
System outer foil:
Inner blades:
Apply oil.
The appliance may not operate in
an ambient temperature
Shaver stopped
approximately 5 °C or lower.
functioning even after
charging.
The battery has reached the end
of its life.
Apply oil.
The shaver makes a high‑pitched
sound due to the linear motor
drive. This does not indicate a
problem.
Makes a loud sound.
Confirm that the blades are
properly attached.
Clean the system outer foil with
the brush.
Action
Approximately 1 year
Approximately 2 years
15
2015/04/15
16:48:36
Advertisement
Table of Contents
