Charging The Shaver - Panasonic ES-LT4N Operating Instructions Manual

Charging the shaver

1
1
Insert the appliance plug into
the shaver.
• Turn the shaver off before inserting.
2
2
Plug in the adaptor into a
household outlet.
• Wipe off any water droplets on the
appliance socket.
• Check that the charge status lamp (
glows.
• Charging is completed after approx. 1 hour.
The charging time may differ with the charging capacity.
• Charging the appliance after each use will not affect the
battery life.
3
3
Disconnect the adaptor after charging is
completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
10
ES-LT4N_ME.indb 10
2
The charge status lamp (
1
The number of the battery
)
capacity lamp will increase as
charging progresses.
The charge status lamp (
• Recommended ambient temperature for charging is 10 – 35 °C.
It may take longer to charge or the battery may fail to charge
properly in extremely high or low temperatures.
Charge the shaver within the recommended ambient temperature
range.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp (
minutes. It will eventually glow if kept connected.
• If there is noise from radio or other source while using the
shaver, move to a different location to use the shaver.
While charging After charging is completed
)
The battery capacity lamp and
glows.
the charge status lamp (
will light up and then turn off
Abnormal charging
) will blink twice every second.
) may not glow for a few
)
after 5 seconds.
2015/04/15 16:48:35