Advertisement
7
THRESHOLD VALUE FINE ADJUSTMENT FUNCTION
● Set fine adjustment of threshold value in RUN mode.
● Also, the threshold value fine adjustment function can be used in forced ON
output mode and forced OFF output mode
● For setting of the sensing output, refer to <PRO6> in "PRO MODE OPERA-
TION MANUAL."
<Normal mode, Rising differential mode or Trailing differential mode>
Press down
Press down
UP / DOWN key
SET key
<Window comparator mode or Hysteresis mode>
● When setting sensing output to the window comparator mode or hysteresis
mode, "
" and "
" can be changed to another by pressing down
SET key for 2 sec.
In case conducting threshold value fine adjustment of "
down UP key or Down key, and "
threshold value fine adjustment can be conducted.
Press down
Press down
UP / DOWN key
UP / DOWN key
Note: It may not respond when values of "
" and "
to confirm with this device.
8
KEY LOCK FUNCTION
● The key lock function prevents key operations so that the conditions set in
each setting mode are not inadvertently changed.
● If operating key switch after key lock is set, "
digital display.
<Set key lock>
Press down for
3 sec. or more
<Release key lock>
Press down for
3 sec. or more
,
are displayed
9
SENSING OUTPUT OPERATION MODE
● When MODE indicator: L / D (yellow) lights up, sensing output operation can be set.
Press down
UP / DOWN key
10
CUSTOM MODE
● When MODE indicator: CUST (yellow) lights up,
Response time setting, Emission power setting
or Hysteresis setting can be displayed.
For the setting procedure, refer to <PRO5> in
"PRO MODE OPERATION MANUAL."
● By pressing UP key or DOWN key, the setting in
each item will be changed.
● Press SET key to confirm the setting.
● For setting of each item, refer to the following table.
Item
Digital display
Response time setting
Emission power setting
Hysteresis setting
Confirmed
Automatically set without pressing
down SET key in approx. 2 sec.
" or "
" or "
" are displayed. Then, the
Press down
SET key
Confirmed
Automatically set without pressing
down SET key in approx. 2 sec.
" are close because of relation of hysteresis. Be sure
" is indicated on the
Automatic
Automatic
Press down
SET key
Confirmed
Confirmed
SET key
DOWN key
UP key
MODE key
MODE indicator
CUST (Yellow)
Reference item
<PRO 1: Response time setting>
<PRO 1: Emission power setting>
<PRO 1: Hysteresis setting>
SEN TRONIC
056 222 38 18
AG
11
PRO MODE
● When MODE indicator: PRO (yellow) lights up, PRO mode can be set.
● For detail of PRO mode, refer to " PRO MODE OPERATION MANUAL."
SET key (confirm)
UP (+) key (select)
Procedure
<PRO1>
", press
<PRO2>
<PRO3>
+, -
<PRO4>
<PRO5>
<PRO6>
<PRO7>
mailbox@sentronic.com
DOWN (-) key (select)
MODE key
MODE indicator PRO (Yellow)
SET
Responce time setting
+, -
Timer setting
+, -
Hysteresis setting
+, -
+, -
+, -
Shift amount setting
+, -
Emission power setting
+, -
Timer range setting
SET
Teaching lock setting
+, -
Setting items in digital display setting
+, -
Setting of digital display turning
+, -
+, -
+, -
ECO setting
+, -
Time period hold setting
SET
Data bank loading setting
+, -
Data bank saving setting
+, -
+, -
+, -
Back up setting
SET
Copy setting
+, -
Copy action setting
+, -
Copy lock setting
+, -
+, -
+, -
Communication protocol setting
+, -
External input setting
SET
Code setting
+, -
Display adjustment setting
+, -
Reset setting
+, -
+, -
+, -
CUSTOM setting
+, -
Interference prevention setting
SET
Sensing output setting
+, -
SET
Logic operation setting
+, -
Setting of threshold value tracking
www.sentronic.com
Advertisement
