Advertisement
Quick guide
2
Inserting the batteries
1 Pull out the back cover of remote control
2 Insert AAA or R03 batteries
(can be used ~ 1 year)
3 Close the cover
Clock setting
1 Press CLOCK
2 Set the time
3 ConÞ rm
Basic operation
1 Select the desired mode
AUTO
HEAT
FAN
2 Start/stop the operation
• Please note that the OFF indication
to start.
3 Select the desired temperature
• Selection range: 16 °C ~ 30 °C (Not
applicable for FAN mode).
• Operating the unit within the recommended
temperature may save energy.
HEAT : 20 °C ~ 24 °C.
COOL: 26 °C ~ 28 °C.
DRY : 1 °C ~ 2 °C lower than room
temperature.
• The set temperature selection range can be
customized according to requirement. Please
consult authorised dealer.
• To dim or restore the unit's indicator brightness, press
and hold for 5 seconds.
• Use remote control within 8 m from the remote control
receiver of the indoor unit.
The illustrations in this manual are for explanation
purposes only and may differ from the actual unit. They are
subject to change without notice for future improvement.
COOL
DRY
POWER
is on
Advertisement
