Advertisement
Before you contact technical support, please make sure that the power cord is correctly
plugged into the power supply and the power adapter is plugged into the DS15.
If you do need to contact us, please collect the following information, which you will
find on the label on the back of the computer: Product Model No., Product Part No.,
and Product Serial Number. See Fig. K for their location. We provide support via the
Internet, phone, or email.
Use our Online Support Center at http://planar.custhelp.com.This support database
is searchable and available 24 hours a day, 7 days a week.
Call our Technical Support team at 866-PLANAR1 (866-752-6271), available Monday
through Friday from 5 AM to 5 PM Pacific Time.
Email: support@planar.com.
PRODUCT SPECIFICATIONS
Warning
• To prevent the risk of fire or shock hazards,do not expose this product to rain or moisture.
• Please do not open or disassemble the product as this may cause electric shock
and void warranty.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user's
guide to maximize the life of your unit.
Do
• Turn off the product before cleaning.
• Use only a dry soft cloth or clean room wiper when cleaning the LCD panel surface.
• Use a soft cloth moistened with mild detergent to clean the display housing.
• Use only designated power cord with the designated AC adapter.
• Disconnect the power plug from AC outlet if the product is not used for a long period of time.
• Keep away from cold.
• Keep away from high temperatures or fire hazards.
Don't
• Open the computer casing. Any dismantling or adjustments may result in electric shock.
• Touch the LCD panel surface with sharp or hard objects.
• Use abrasive cleaners, waxes or solvents for your cleaning.
• Pull on the power cord or power adapter, or damage the power cord insulation.
• Operate the product under the following conditions:
- Extremely hot cold or humid environment. (See operating specifications.)
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
- In water
10
Operating Specifications
Electrical Rating: AC 100V-240V, DC 18.5V, 3.5A,
Operating Temperature: 5 degrees C – 40 degrees C
Storage Temperature: -20 degrees C – 60 degrees C
Operating Humidity: under 25 degrees C – 50%, 40 degrees C – 85% humidity
Storage Humidity: under 25 degrees C – 50%,
60 degrees C – 85% humidity (no condensation)
Storage Altitude: 0m – 2900m
Declaration of Conformity (Safety Standards)
Declares that the following product:
DS15
Model: PTAB-915D
Conforms to the following safety standards:
Safety: CB, UL
EMC: FCC, CB
Safety
CB: IEC 60950-1999
UL: UL 60950-1
EMC:
FCC: (USA)
FCC ID: BJM-PTAB915D
EMC: FCC part 15 subpart B
This device complies with Part 15 of the FCC Rules. Operation is subject
RF: FCC part 15 subpart C
to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received,
020-0338-00 Rev D
including interference that may cause undesired operation.
a. 15.105 Federal Communications Commission (FCC) Requirements, Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void
your authority to operate the equipment.
b. Regulatory information / Disclaimers
Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided
with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by
the manufacturer may void the user's authority to operate the equipment. The manufacturer is not responsible for any radio or
television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and
equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such
unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no
liability for any damage or violation of government regulations arising from failing to comply with these guidelines.
FCC ID: BJM-PTAB915D
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference and (2) this device must accept any interference received, including interference that may cause
undesired operation.
11
Advertisement
