GMC Yukon Denali 2005 Manual page 8

8. Select the desired street name from the list by
touching the screen button beside the correct
street name.
9. Enter the address number using the numeric
keypad on the screen. You may first have to
select the correct range for the address number,
then enter the desired address and touch the
OK screen button.
10. Touch the screen button beside the correct city.
11. Touch the Enter Destination screen button.
The address entry is now complete.
12. Once you begin driving you will hear an audio
prompt to "Proceed to the highlighted route."
You are now in route guidance mode.
Entering a Point of Interest (POI)
You can set a destination by entering a Point of
Interest (POI). To enter a POI, do the following:
1. Press the power/volume knob to turn the audio and
navigation system on.
2. Insert the DVD map disc into the radio CD slot.
3. A notice may appear. Touch the NEXT screen
button to proceed.
If the radio is already on with a map disc inserted,
push the NAV hard key.
1-6
4. Touch the DEST screen button located in the lower
left corner of the map.
5. Verify that the selected Search Area is correct.
6. Touch the POI screen button.
7. Enter the specific title of the POI in the Name
space (Washington Monument, Gateway Arch)
using the alpha keypad on the screen.
•
If there are POIs with the same name, spell out
the name and then touch the List screen button
(McDonald's restaurant vs. McDonald corporate
office).
•
Select the business desired.
•
The system will list the locations of POIs in order
of distance from your location.
•
Touch the screen button next to the address of
the POI desired.
8. Touch the Enter Destination screen button. The POI
entry is now complete.
9. Once you begin driving you will hear an audio
prompt to "Proceed to the highlighted route."
You are now in route guidance mode.
Using the Category or City selections will aid the system
in finding your POI by limiting the search options.