Honda CIVIC SEDAN 2018 Owner's Manual page 601

■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
* Not available on all models
uuJump StartinguJump Starting Procedure
1What to Do After the Engine Starts
The indicators for the Vehicle Stability Assist (VSA®)
system, Vehicle Stability Assist (VSA®) OFF, Low Tire
Pressure/TPMS * and Collision Mitigation Braking
System TM (CMBS TM ) * may come on after re-
connecting the battery. Drive a short distance at
more than 12 mph (20 km/h). The indicators should
go off. If they do not, have your vehicle checked by a
dealer.
599