Honda CIVIC SEDAN 2018 Owner's Manual page 439

■
Shift Lever Operation
Models with information display
Shift Lever Position
Indicator
Models with driver information interface
Shift Lever Position
Indicator
Depress the brake pedal and press the shift lever release
button to shift.
Shift without pressing the shift lever release button.
Press the shift lever release button and shift.
1Shift Lever Operation
NOTICE
When you change the shift lever from
vice versa, come to a complete stop and keep the
brake pedal depressed.
Operating the shift lever before the vehicle has come
to a complete standstill can damage the transmission.
Use the shift lever position indicator to check the
Tachometer's
lever position before pulling away.
red zone
If the transmission indicator blinks when driving, in
any shift position, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer's red zone (engine
Tachometer's
speed limit). If this happens, you may experience a
red zone
slight jolt.
It may not be possible to operate the shift lever if the
brake pedal is applied while the shift lever release
button is held down.
Depress the brake pedal first.
When shifting positions in extremely low
temperatures (-22°F/-30°C), there may be a short
delay before the shift position is displayed. Always
confirm you are in the correct shift position before
driving.
uuWhen DrivinguShifting
to and
( D ( R
437