Object Table; Limitation Of Warranty And Liability - S&P 6002-A Installation, Operation And Maintenance Manual

Ventilation Controlled by BACnet Building Automation

Object Table

Type and Instance
AV 0
AV 1
AV 2
BI 0
B0 0
B0 1
B0 2
AV XYY
WARRANTY:
Soler & Palau USA warrants this controller equipment to be free from defects in material and workmanship for two (2) years from date of
shipment and the sensor will have a one (1) year from date of shipment. Any units or parts which prove to be defective and are reported
during the warranty period will be replaced at our option when returned to our factory, transportation prepaid. Deterioration or wear by
heat, abrasive action, chemicals, improper installation or operation or lack of normal maintenance shall not constitute defects, and are not
covered by warranty.
The motor is warranted by the motor manufacturer for one (1) year. If the motor becomes defective in the warranty period, it should be taken
to the nearest authorized motor service station. If this is not done, the motor manufacturer will not warrant the motor. Call the factory for
instructions if authorized service station is not known.
Soler & Palau USA will not be responsible for any installation, removal or re-installation costs or any consequential damage resulting in
failure to meet conditions of any warranty.

LIMITATION OF WARRANTY AND LIABILITY

This warranty does not apply to any such S&P product or parts which have failed as a result of faulty installation or abuse, or incorrect
electrical connections or alterations, made by others, or use under abnormal operating conditions or misapplication of the products and
parts.
Soler & Palau USA will not approve for payment any repairs made outside the factory without prior written consent of its Jacksonville,
Florida office.
Object Name
gas reading 1
gas reading 2
Ambient temperature
Input 1
Relay 1
Relay 2 0r alarm 2
Alarm 3
Gas reading XYY
X = sensor 1 (top) or 2 (bottom), YY = CAN
Address
Object Property
Present value (R)
Present value (R)
Present value (R)
Present value (R)
Present value (R/W)
Present value (R/W)
Present value (R/W)
Present value (R)
Parameter
Gas reading local sensor A
Gas reading local sensor B
Temperature in celsius
Auxiliary input state 0/1
Relay 1 status on 0/1
Relay 2 or alarm 2 status 0/1
Alarm 3 Indicator status 0/1
Gas reading all sensors on CAN network