Surface Burners - GE Profile PP9830DRBB Owner's Manual & Installation Instructions

Surface Burners

Radiant Surface Units
The control for the radiant surface unit can be set
anywhere between LO and HI for an unlimited number
and off to maintain your selected control setting.
To bring liquids to a boil faster, use a lid to cover the pan.
The control knob must be pushed down and turned
from the OFF
any position other than off, they may be turned without
pushing down.
About the radiant surface units
The radiant cooktop features heating units beneath a
smooth glass surface.
NOTE: A slight odor is normal when a new cooktop is
parts and insulating materials and will disappear in a
short time.
NOTE: On models with light colored glass cooktops, it is
normal for the cooking zones to change color when hot
or cooling down. This is temporary and will disappear as
the glass cools to room temperature.
The surface unit will cycle on and off to maintain your
selected control setting.
on the glass surface when the surface is cool.
cooktop retains enough heat to continue cooking. To
when the food is cooked. Avoid placing anything on the
surface unit until it has cooled completely.
the cleaning cream or full strength white vinegar.
on the cooktop. The cleaning cream will remove this
discoloration.
drop onto the cooktop, they can cause damage.
49-80635-1
OFF position.
The surface unit ON indicator
light will glow when any
surface unit is on.
The HOT surface indicator
light will glow when the glass
surface is hot and will remain
on until the surface has cooled.
Never cook directly on the glass.
Always use cookware.
OFF CENTER
Always place the pan in the center
of the surface unit you are cooking on.
DRAGGING
Do not slide cookware across the
cooktop because it can scratch the
glass. The glass is scratch-resistant,
not scratchproof.
Be sure you turn the control knob
to OFF when you finish cooking.
SURFACE
COOKING
7