Ebyte NB124E User Manual page 14

Chengdu Ebyte Electronic Technology Co.,Ltd
DATA1
LINK2
DATA2
【Note】Status of some special working mode indicator lights:
1、 Restore the factory, NET is always on for 5s, and the other indicators remain on and will go out until NET
goes out;
2、 Wait for the firmware burning, except for the power indicator light, the other indicators will blink at a
cycle of 50ms until the upgrade file is transferred, or exit the firmware burning waits;
3、 During the firmware burning operation, the indicator lights except the power indicator will flash at a cycle
of 500ms until the upgrade is completed;
Copyright ©2012–2023，
Chengdu Ebyte Electronic Technology Co.,Ltd
Channel 1 data Data sending and receiving: flashes when the network or
indicator serial port sends and receives data;
No link connection: the indicator light is off;
Channel 2 Status
With link connection: the indicator light is always on;
Indicator
UDP mode: the indicator light is always on;
Channel 2 data Data sending and receiving: flashes when the network or
indicator serial port sends and receives data;
NB124E_User Manual