Function Buttons; Indicator Lights - Honeywell HWTLMT508W User Manual

IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
This appliance is not intended for use by persons (including children or
elderly) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible
for their safety.
Never clean parts with flammable fluids. The fuel can create a fire hazard
or explosion.
DO NOT store or use gasoline or any other flammable vapors and liquids
in the vicinity of this or any other water dispenser. The fumes can create
a fire hazard or explosion.
Keep this instruction handy for future reference.

FUNCTION BUTTONS

POWER:
Press the cold switch (green) on the back of the unit to turn ON the cooling
function. Press the hot switch (red) to turn on the heating function. DO NOT
turn on the hot function until the unit has water inside the tanks. Please refer
to INSTALLING YOUR WATER DISPENSER FOR THE FIRST TIME section.
WATER TAPS:
Press down the hot, normal or cold water taps to dispense the desired water
temperature. To use the hot water, press the safety switch and simultaneously
press down the tap.
DRAIN PLUG:
Turn counterclockwise to remove the drain plug to drain the water from the
tanks. Turn clockwise to close the drain plug.

INDICATOR LIGHTS

It has three indicator lights for the hot, cold water and power respectively,
which will light up while the feature is working. Once the water has reached
the temperature, the indicator lights will turn OFF.
EN 5