Pioneer PRV-LX1 Quick Start page 3

Record Your Video
Once the encode rates are set, record the
video to the disc in DVD1.
Function button to exit the Function menu.
Press the Record button on the front panel or
the remote control to capture video from the
source device as a recording session. Repeat
these button combinations until all required
video is captured.
Each recording session encodes as a Title.
Build A Menu
Once the video is recorded to the disc, press
the Function button on the front panel.
Highlight DVD Menu from the Edit window
and press Enter.
Arrow down to Menu Design then arrow right
to highlight Design Select. Arrow right again
and continue using the arrow buttons to scroll
through the available menu designs. Press
Enter to select your preferred design.
Depending upon
recorded to the disc, select a design with the
same number of buttons as there are Titles.
After selecting a menu layout, decide whether
a title plays automatically as soon as the disc
is inserted or if the menu appears first. Arrow
left and down to highlight Navigation Cmd.
Arrow right and press Enter to mark your
selections.
The example shown to the right has the disc
playing the menu first as Menu is marked with
a small orange box ( ). To have a title play
first, press Enter when the Title option is
highlighted.
PRV-LX1_QuickStart.doc
Press the
the number of Titles
Function
RECord
Page 3 of 5