Control Lock - LG LSEL6332 Series Owner's Manual

Adjusting the Oven Thermostat
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself
with the new oven, you still think that it is too hot
or too cold, you can adjust the oven thermostat
yourself.
• To begin, either raise or lower the thermostat
15℉ (8 ℃). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower
the thermostat again, using the first adjustment
as a gauge. For example, if the adjustment was
too much, raise or lower the thermostat 10 ℉ (5
℃). If the adjustment was not enough, raise or
lower the thermostat 20 ℉ (12 ℃). Proceed in
this way until the oven is adjusted to your
satisfaction.
1
Press and hold Clock for 3 seconds. Then
press Clock repeatedly until AdJU appears in
the display.
2
Set the number of degrees to adjust:
Press or press and hold the +/- buttons until
the desired number of degrees appears in the
display.
3
Press START to accept the change.
NOTE
• This adjustment does not affect the broiling
temperatures. The adjustment is retained in
memory after a power failure. The oven
temperature can be increased (+) or decreased (-
) as much as 35 ℉ or 19 ℃.
• Once the temperature is increased or decreased,
the display shows the adjusted temperature
until it readjusts.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating
alarm light.
1
Press and hold Clock for 3 seconds. Then
press Clock repeatedly until PrE appears in
the display.
2
Press +/- to turn the light on/off.
3
Press START to accept the change.
Adjusting the Beeper Volume
1
Press and hold Clock for 3 seconds. Then
press Clock repeatedly until Beep appears in
the display.
2
Press +/- to select Hi,Lo,Off.
3
Press START to accept the change.
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either
Fahrenheit (℉) or Celsius (℃) units. The oven
defaults to Fahrenheit unless changed by the user.
1
Press and hold Clock for 3 seconds. Then
press Clock repeatedly until Unit appears in
the display.
2
Press +/- to select F (Fahrenheit) or C (Celsius).
3
Press START to accept the change.
Adjusting Cooktop On Alert Volume
1
Press and hold Clock for 3 seconds. Then
press Clock repeatedly until CtOP appears in
the display.
2
Press +/- to select Hi,Lo,Off.
3
Press START to accept the change.

Control Lock

The Control Lock feature locks the control panel.
1
Press and hold Control Lock for 3 seconds.
2
The lock melody sounds. Loc and the lock icon
appear in the display.
k
3
To deactivate the Control Lock feature, press
and hold Control Lock for 3 seconds. The
unlock melody sounds and the controls
unlock.
OPERATION 21