Table of Contents
Advertisement
3
Insert the assembled handle piece
into the steam mop base. Push the
tube base together until you hear a
click. (fig. 2)
4
For your comfort, you can adjust the
height of the mop. Just lift the latch
on the tube 90 degrees to the open
position. Holding the handle, extend
the tube to the desired height and
then close the latch to the locked
position. (fig. 3)
QUICK TIP: For easier pushing and
pulling, extend the handle length.
fig. 2
fig. 3
IMPORTANT: Never use the Light &
Easy™ Steam Mop without attaching
a micro-fiber cleaning pad to avoid
damage to your floor and mop.
IMPORTANT: Do not use on unsealed
wood or unglazed ceramic floors.
On surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by the
heat and steam action. It is always
recommended to test an isolated area
of the surface to be cleaned before
proceeding. We recommend that you
check the use and care instructions
from the floor manufacturer.
www.sharkclean.com
3
Advertisement
Table of Contents
