Table of Contents
Advertisement
Attaching the Stand
ATTACHING THE STAND
Attaching the stand/feet
To complete the stand/feet installation you will require a cross head screw driver.
Screws that are included.
4 x
TV panel must be facing downwards.
1
Back/Shortest
Front/Longest
2
3
Detaching the stand
Remove the screws highlighted then remove the stand/feet from the underside of the TV set.
3
4
1
2
4 x
3
4
1
2
4 x
(fi g.1) Place the TV set on a fl at and
clean surface with the panel facing
downwards to avoid damage, then fi x
the stand/feet shown.
(fi g.2) When the stand feet are
installed correctly the stand/feet will
be longest at the front of the TV
and shortest at the back with the
feet pointing away from each other.
(fi g.3) When the stand/feet are
in the correct position, secure the
stand/feet to the underside of the
TV set using the 4 screws provided.
9
9
Advertisement
Table of Contents
