Installation procedure
Note: When you install the wireless WAN card, ensure that you connect the orange cable to the main
connector on the card, and the blue cable to the auxiliary connector on the card.
2242 M.2 solid-state drive and the bracket
Prerequisite
Before you start, read
and print the following instructions.
Generic Safety and Compliance Notices
Attention:
• If you replace a M.2 solid-state drive, you might need to install a new operating system. For details on how
to install a new operating system, see "Install a Windows operating system and drivers" on page 38.
.
45
Chapter 6
CRU replacement