Connecting The Power Cord (1) - Pioneer AVIC-N4 Installation Manual

Section
03 Connecting the System

Connecting the power cord (1)

Yellow
To terminal always supplied with power
regardless of ignition switch position.
Red
To electric terminal controlled by ignition
switch (12VDC) ON/OFF.
Orange/White
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Note
When a subwoofer is connected to this navigation
system instead of a rear speaker, change the rear
output setting in the Initial Setting. (Refer to the
Operation Manual.) The subwoofer output of this
navigation system is monaural.
Front speaker
Left
Rear speaker or
Subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with violet and violet/black leads of this
navigation system. Do not connect anything with green and green/black leads.
Not used.
12
En
Fuse holder
Fuse (10 A)
White
White/Black
Green
Green/Black
Green
Green/Black Violet/Black
Fuse resistor
Fuse resistor
With a 2 speaker system, do not connect anything to
the speaker leads that are not connected to speakers.
Gray
Gray/Black
Violet
Violet/Black
Violet
Front speaker
Right
Rear speaker or
Subwoofer (4 Ω)
Subwoofer (4 Ω)
2