Electrolux ESG42310SX User Manual page 13

How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press .
• The indicator
flashes.
• The remaining indicators are off.
• The display shows the current
setting: e.g.
2. Press repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
7.4 AirDry
AirDry improves the drying results with
less energy consumption. The appliance
door opens automatically during the
drying phase and remains ajar.
AirDry is automatically activated with all
programmes other than
applicable).
The duration of the drying phase and the
door opening time vary depending on the
selected programme and options.
When AirDry opens the door, the display
shows the remaining time of the running
programme.
still
= level 4.
(if
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for at least 3 minutes,
the running programme
ends.
CAUTION!
If children have access to
the appliance, we advise to
deactivate AirDry. The
automatic opening of the
door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press .
• The indicator
• The remaining indicators are off.
• The display shows the current
setting:
– = AirDry is deactivated.
– = AirDry is activated.
2. Press to change the setting.
3. Press the on/off button to confirm the
setting.
7.5 Factory reset
Factory reset restores the factory
defaults. Before the reset, make sure the
appliance is in user mode.
Press and hold and
The displays shows _ _ _ for about 5
seconds.
The appliance returns to programme
selection mode.
Factory reset does not reset
the cycle counter.
7.6 Cycle counter
You can view the number of completed
dishwashing cycles in the cycle counter.
1. Press the on/off button to activate the
dishwasher. Make sure that the
ENGLISH 13
still flashes.
for 5 seconds.