Table of Contents
Advertisement
G
ENERAL
Safety
Disconnect mains plug when :
– the RED light below the screen is flashing continuously and the TV cannot be
switched on.
– a bright white line is displayed across the screen.
– cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp
chamois leather.
– there is a lightning storm.
– the set is left unattended for an extended period of time.
Caution : Never attempt to repair a defective TV yourself. Always consult a skilled
service personnel.
Switch off your TV overnight via the POWER ON/OFF button instead of leaving it
on standby. You save energy and at the same time demagnetise the picture tube.
A demagnetised picture tube supports good picture quality. When the set is
switched on, do not shift, move or turn (e.g. on a swivel base) the set around
because an uneveness in colour in some parts of the screen may occur.This can be
eliminated by switching off the set by the mains power button . Wait for 20
minutes before switching on again. If symptom still exists, call service.
Before calling service
Symptom
Colour patch
(uneveness)
No power
No picture
Good picture but no sound
Good sound but poor or
abnormal colour or no picture
Snowish picture and noise
Horizontal dotted lines
'Ghosts' or double image
TV not responding to remote
control handset
Great user manuals database on
I
/T
NFORMATION
IPS
• Switch off TV by the mains power button. Wait for
• Check TV's AC power cord is plugged into mains
• Check antenna connection at rear of the TV.
• Possible faulty TV station. Try another channel.
• Increase the contrast setting first and then the
• Try increasing the volume.
• Check whether sound is switched on.
• Increase the contrast setting first and then the
• Check antenna connection at rear of the TV.
• Possible electrical interference( e.g. hairdryer,
• Possible poor positioning of antenna. Using a
• Check life span of batteries.
• Aim remote control handset directly at remote
Check/Action
20 minutes before switching on again.
socket. If there is still no power, disconnect plug.
Wait for 60 seconds and re-insert plug. Switch on
TV again.
brightness setting.
brightness setting.
nearby neon lights, etc). Switch off equipment.
highly directional antenna may improve reception.
control sensor lens on the TV set.
UserManuals.info
2 4
2 4
2 4
Advertisement
Table of Contents
