Door Lock (White/Orange) - Pioneer DEH-P77DH Installation Manual

DOOR LOCK (White/Orange)

The white/orange lead should be connected to the "unlock" lead for your vehicles door
locking system, so that when you open the driver's door by your vehicle's remote control,
your Pioneer DFS Alarm is deactivated.
First, locate the two wires from the lock/unlock switch that operate the factory door lock
solenoid for the driver's side. Using a meter, determine which lead is used to unlock the
door; connect this to the white/orange lead of your Pioneer Car Stereo. In the DFS Alarm
menu, select the door-lock system type according to your vehicle (grounding or non-
grounding).
If you have difficulty wiring this connection, please consult your nearest Installation spe-
cialist.
Note:
• If your vehicle is equipped with a central door lock but the glass or shock sensor is not connected,
if the window is broken and the central door lock is released, this unit's DFS Alarm will not oper-
ate.
• Pioneer recommends that both a shock sensor and glass sensor be installed when you are using the
"Remote Disarming" feature.
Unlock
Lock/Unlock
Switch
Lock
This product
Blue/Brown
(refer to "STARTER CUT-OFF".)
White/Orange
White/Red (refer to "ALARM SENSOR".)
Brown (refer to "ALARM OUTPUT".)
White/Yellow (refer to "DOOR SWITCH".)
Switching
Relays
Lock Solenoid
Fig. 8
12