Central Door Lock Systems (Lock); Selecting The Door Lock Type - Pioneer DEH-P720 Operation Manual

A Title (English)
7 If this function is "OFF"
The "DFS Alarm" can be disarmed if the ignition key is inserted in the ignition and turned
from "OFF" position to the "ON" within the "Entry Delay Time".
Note:
• In order for the "DFS Alarm" to operate when a window is broken, connect this product's white/red
(ALARM SENSOR) lead to glass sensor securely.
• In order for the "DFS Alarm" to operate when a door is forced open, connect this product's
white/yellow (DOOR SWITCH) lead securely.
1. Press the 5 button to switch
the Starter Disable function
ON.
Press the ∞ button to deactivate the
Starter Disable function.
2. Press the FUNCTION button
to move to the next selection.

Central Door Lock Systems (LOCK)

The "DFS Alarm" can be disarmed by unlocking the doors with a remote keyless entry
system. If this product's standby state is disarmed, the LED's blinking speed becomes
faster. (It can be understood if the "DFS Alarm" has been disarmed by the change in the
LED's blinking speed.)
Note:
• If the "DFS Alarm" is disarmed by the keyless entry system, it will remain disarmed. To reset, turn
the ignition on after reattaching the face, then turn the ignition to the off position and remove the
detachable face.
• If your vehicle is equipped with a central door lock but the glass or shock sensor is not connected,
if the window is broken and the central door lock is released, this product's DFS Alarm will not
operate.
• Pioneer recommends that both a shock sensor and glass sensor be installed when you are using the
"Remote Disarming" feature.

Selecting the Door Lock Type

• Select the "Lock-L :CLS" or
"Lock-H :CLS" for the cor-
rect door lock type with the
2/3 buttons.
48