Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita 9553NB Instruction Manual

ENGLISH (Original instructions)
1. Shaft lock
2. Slide switch
3. Wheel guard
4. Screw
5. Bearing box
6. Lock nut
7. Depressed center grinding wheel/
Multi-disc
8. Inner flange

SPECIFICATIONS

Depressed center wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)/No load speed (n
Overall length
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
............. DOUBLE INSULATION
... Wear safety glasses.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Explanation of general view
9. Lock nut wrench
10. Abrasive disc
11. Rubber pad
12. Wire cup brush/Wire bevel brush
13. Abrasive cut-off wheel/diamond
wheel
14. Wheel guard for abrasive cut-off
wheel/diamond wheel
15. Abrasive cut-off wheel
Model
)
0
Net weight
Safety class
9553NB
100 mm
6.4 mm
M10
11,000 min
258 mm
1.8 kg
END202-8
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
ENE048-1
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
ENF002-2 to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
GEA005-3
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
16. Thickness: Less than 4 mm (5/32")
17. Thickness: 4 mm (5/32") or more
18. Diamond wheel
19. Exhaust vent
20. Inhalation vent
9554NB
115 mm
6.4 mm
M14
-1 -1
10,000 min
258 mm
1.8 kg
/II
9555NB
125 mm
6.4 mm
M14
-1
10,000 min
258 mm
1.9 kg
5