c.
Optical drive (see
d.
WLAN module (see
e.
Fan (see
Fan on page
f.
Heat sink (see
g.
Keyboard (see
h.
Top cover (see
Remove the speaker assembly:
1.
Position the computer upside-down with the front toward you.
2.
Disconnect the speaker cable from the system board (1).
3.
Remove the speaker cable from the routing path (2) built into the computer.
4.
Position the computer right-side up with the front toward you.
5.
Remove the Phillips PM2.0×4.0 screw (1) that secures the speaker assembly to the computer.
6.
Remove the WLAN antenna cables from the clip built into the speaker (2).
Optical drive on page
WLAN/Bluetooth combo card on page
56)
Heat sink on page
57)
Keyboard on page
61)
Top cover on page
64)
42)
49)
Component replacement procedures
79