Connecting The Units - Pioneer DEH-P3600 Installation Manual

Connecting the Units

7 When not connecting a rear speaker lead to a Subwoofer
This product
Front output
Subwoofer output or
IP-BUS input
non fading output
(Blue)
Antenna jack Fuse
IP-BUS cable
Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300
mA 12 V DC).
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Yellow
To terminal always supplied with power regardless of
ignition switch position.
Red
To electric terminal controlled by ignition switch (12
V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Perform these connections when using the
optional amplifier.
Connecting cords with RCA pin
plugs (sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Multi-CD player
(sold separately)
System remote control
+ +
Front speaker Front speaker
≠ ≠
White Gray
+ +
Front speaker Front speaker
≠ ≠
White/black Gray/black
Left Right
Green Violet
+
+
Rear speaker Rear speaker
≠ ≠
Green/black Violet/black
+ +
Subwoofer Subwoofer
≠ ≠
7 When using a Subwoofer without using the optional amplifier
This product
Subwoofer output
Antenna jack
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Yellow
To terminal always supplied with power regardless of
ignition switch position.
Red
To electric terminal controlled by ignition switch (12
V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Fig. 2
Front output
IP-BUS input
(Blue)
Fuse
Multi-CD player
(sold separately)
IP-BUS cable
Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300
mA 12 V DC).
White
+
Front speaker
≠
White/black
Left
Green
+
Subwoofer
≠
Green/black Violet/black
Note:
Change the initial setting of this unit (refer to the Operation
Manual). The subwoofer output of this unit is monaural.
<ENGLISH>
Gray
+
Front speaker
≠
Gray/black
Right
Violet
+
Subwoofer
≠
Fig. 3