ASL INTERCOM BPC65 Installation Manual page 2

This equipment is designed and manufactured to conform to the following EC standards:
EMC:
Safety:
Voice Alarm: When installed in a Voice Alarm system designed in accordance with the
Failure to use the equipment in the manner described in the product literature will invalidate the
warranty.
A 'Declaration of Conformity' statement to the above standards, and a list of auxiliary equipment used
for compliance verification, is available on request.
This product must be disposed of in accordance with the WEEE directive.
Contents
1 General Information ................................................................................................................................................... 3
2 Installation ................................................................................................................................................................. 5
3 Mechanical Dimensions............................................................................................................................................ 14
4 Safety and Precautions............................................................................................................................................. 17
Additional User Documentation:
1. BPC65 Product Manual (U-0456-0143)
2. ASL EN 54-16 & ISO 7240-16 System Design Guide (T-0667-0016)
3. Above documentation and additional reference information are available from the ASL's website at
www.asl-control.co.uk
Copyright © 2011 Application Solutions (Safety and Security) Limited
Application Solutions (Safety and Security) Limited
Unit 17 Cliffe Industrial Estate
Lewes - East Sussex
BN8 6JL - UK
Tel: +44(0)1273 405411
www.asl-control.co.uk
All rights reserved.
Information contained in this document is believed to be accurate, however no representation or warranty is given and Application
Solutions (Safety and Security) Limited assumes no liability with respect to the accuracy of such information.
BPC65 / BDIST / MDIST – Installation Guide
EN 61000-6-4:2007, EN 61000-6-2:2005, EN 50121-4:2006, EN 61000-4-13:2002,
ENV 50204:1995, EN 50130-4:1996
EN 60950-1:2006 (pollution degree 2)
ASL EN 54-16 & ISO 7240-16 System Design Guide (T-0667-0016) and configured as
described in its user documentation, this equipment meets the requirement of
EN 54-16:2008, ISO 7240-16:2007, BS 5839-8:2008, EN 54-4:1997, EN 54-4:1997/A1:2002
and EN 54-4:1997/A2:2006.
Fax: +44(0)1273 405415
U-0456-0142.doc – Issue: 03 complete, approved
Page 2 of 20