Overview Accessories; Included Accessories - Singer C5600 Instruction Manual

Overview Accessories

Included Accessories (Not Pictured)
• Needles
• Foot control
• Power cord
Bobbin x4 — Only use the type of metal bobbins delivered with your machine (SINGER® Class 15 met-
al bobbins). One of the bobbins is inserted in the machine upon delivery.
Felt Pad x2 — Used to cushion the spool of thread when using the Auxiliary Spool Pin.
Spool Cap — For various thread spool styles.
Auxiliary Spool Pin — For sewing with large thread spools or when using specialty threads.
Brush and Seam Ripper — Used to remove stitches/brush off lint.
Screwdriver — Used to remove the needle plate, presser foot holder or needle screw.
Edge/Quilting Guide — Used for straight and accurate sewing, e.g., when quilting. Insert the guide into
the slot at the back of the presser foot holder. Adjust the position to fit your project.
Darning Plate — Use the darning plate when you need to control fabric feeding for button sewing, free
motion work and free motion darning. Raise needle and presser foot, and position darning plate onto the
needle plate with the two pins on the back inserted to the holes of needle plate.
Introduction – 3 Introduction – 3
English English