Advertisement
Quick Links
Advertisement
Related Manuals for HBF Furniture Cityscape 2.0
Summary of Contents for HBF Furniture Cityscape 2.0
- Page 1 Cityscape 2.0 Installation Instructions...
-
Page 2: Tools Required
TOOLS REQUIRED POWER DRIVER/DRILL 4MM ALLEN WRENCH 8MM ALLEN WRENCH... - Page 3 STANDARD MODEL LEG ATTACHMENT This attachment process Works for the following PLACE UNIT ON ITS BACK AND ATTACH LEGS Models: AS SHOWN BELOW. HLD421-011 HLD421-041 HLD421-012 HLD421-042 • (16) ¼-20 x 23mm Ultra Low Profile Socket Head HLD421-013 HLD421-043 Bolt. (4) Bolts per leg assembly HLD421-021 HLD421-044 •...
- Page 4 PENTAGON LEG ATTACHMENT This attachment process works for the following PLACE UNIT ON ITS BACK AND ATTACH LEGS AS SHOWN BELOW. models: • (20) ¼-20 x 23mm Ultra Low Profile Socket Head Bolt HLD421-014 • (3) 120 deg leg assembly HLD421-024 •...
- Page 5 PENTAGON OPTIONAL LEG ATTACHMENT • (20) ¼-20 x 23mm Ultra Low Profile Socket Head Bolt • (2) 120 deg leg assembly • (3) 90 deg leg assembly This attachment process allows for all legs to be in alignment along all backs in the direction of the configuration being created.
- Page 6 THIS TABLE ASSEMBLY REQUIRES THE CITYSCAPE 2.0 TABLE ASSEMBLY ATTACHMENT OF ADJACENT UNITS. ONE ON AND LEG ATTACHMENT EACH SIDE. IT IS NOT A STAND ALONE UNIT • (8) ¼-20 x 15mm Ultra Low Profile Socket This assembly process works...
- Page 7 CITYSCAPE 2.0 TABLE ASSEMBLY This assembly process works AND LEG ATTACHMENT for the following models: • (8) ¼-20 x 15mm Ultra Low Profile Socket HTD42101-3231 HTD42101-5931 Head Bolt HTD42102-3231 HTD42102-5931 • (2) Right Leg Assemblies HTD42103-5931 • (2) Left Leg Assemblies...
- Page 8 TABLE AND ADJACENT UNIT ASSEMBLY • Place assembled table on its back. • Place adjacent units on their backs. If leg assemblies have not been installed, do not install the leg assemblies that will be replaced by the table leg assemblies. If leg assemblies have been installed, remove leg assemblies (red leg assemblies).
- Page 9 This assembly process works TABLE AND ADJACENT UNIT ASSEMBLY for the following table models: HTD42101-5931 POSSIBLE CONFIGURATION HTD42102-5931 • Assemble the 4 corner table legs (snug only). HTD42103-5931 • This assembly requires the purchase of a ganging kit (HAD421-010)(Sold separately). The leg with the angled bracket will not be used.
Need help?
Do you have a question about the Cityscape 2.0 and is the answer not in the manual?
Questions and answers