LEM DVL 1500/SP8 Manual

Voltage transducer DVL 1500/SP8
For the electronic measurement of voltage: DC, AC, pulsed..., with galvanic separation
between the primary and the secondary circuit.
Features
● Bipolar and insulated measurement up to 2250 V
● Current output
● Primary input connection with M5 studs
● Compatible with AV 100 family.
Special feature
● Connections of secondary: 3 M5 threaded studs.
Advantages
● Low consumption and low losses
● Compact design
● Good behavior under common mode variations
● Excellent accuracy (offset, sensitivity, linearity)
● Good delay time
● Low temperature variation
● High immunity to external interferences.
N° 97.H9.65.008.0
9December2022/Version 4
Applications
● AC variable speed and servo motor drives
● Static converters for DC motor drives
● Battery supplied applications
● Uninterruptible Power Supplies (UPS)
● Switched Mode Power Supplies (SMPS)
● Power supplies for welding applications
● Renewable Energy (Solar and Wind)
● Single or three phase inverters
● Propulsion and braking choppers
● Propulsion converters
● Auxiliary converters
● High power drives
● Substations.
Standards
● EN 50155: 2021
● EN 50178: 1997
● EN 50124-1: 2017
● EN 50121-3-2: 2016
● UL 508: 2013
● IEC 61010-1:2010/AMD1: 2016.
Application Domains
● Railway (fixed installations and onboard)
● Industrial.
LEM reserves the right to carry out modifications on its transducers,
in order to improve them.
= 1500 V
U
P N
Page 1/9
LEM International SA
Route du Nant-d'Avril, 152
1217 Meyrin
www.lem.com