Advertisement
This system is able to recognize commands in three
different languages. The system will only recognize
commands based on the language selected from the
Driver Information Center (DIC). See "Driver Information
Center, DIC Vehicle Personalization" in the Index of your
vehicles owner manual.
Voice Recognition Commands
The following list shows all of the voice commands
available for the navigation system with a brief
description of each. The commands are listed with the
optional words in brackets. To use the voice commands,
refer to the instructions listed previously.
Voice Tag Commands
The following are voice tag commands you can access
by clearly stating the commands exactly as they are
written. You may have up to 40 voice tag entries
for destinations.
Navigation go to [destination] (voice tag), navigation
select [destination] (voice tag): These commands
instruct the system to select a destination saved under
the voice tag you have stored.
When a destination is requested using a voice tag, the
system will state, "Press or say cancel if not correct".
To cancel this voice tag destination, using voice
recognition, push and hold the SRCE button on the
steering wheel until you hear a beep, then say ''cancel''.
Canceling voice tag destination by voice recognition,
must be done within five seconds after the voice prompt.
If you are not currently driving on a route, the system will
automatically create the voice tag destination as the final
destination. If you are currently driving on a route, the
system will automatically create the voice tag destination
as a waypoint. Up to three waypoints can be created.
Storing Voice Tags
From the address book entry information page, press
the Add Voice tag screen button. The system will
respond "Name Please?".
Navigation Help
Navigation Help: This command instructs the system
to assist with navigation commands.
4-3
Advertisement
