Advertisement
10. Once a street has been selected, the numeric
keyboard will display, allowing you to enter the
house number. The system will display the house
number range that is available for the street.
11. Select the Go screen button. A map screen, with
the destination marked, will appear.
12. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
13. Select the Start Guidance screen button. You are
now ready to start your route.
See "Address Entry " under Destination on page 2-13
for more information.
Entering a Point of Interest (POI)
To set a destination by entering a Point of Interest (POI),
do the following:
1. If the radio is already on with a map disc inserted,
skip to Step 5.
O
2. Press the
(power) knob to turn the system on.
3. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 2-4 for more
information.
4. A caution may appear. Touch the OK screen button
to proceed.
5. Press the DEST hard key.
i
6. Press the
Point of Interest screen button.
7. Enter the specific title of the POI in the POI name
space (i.e. Washington Monument).
If five or less names are available, a list will display.
If more than five are available, there will be a
screen button with a number in it, it represents the
number of available POIs. Select this button to
view the list.
8. Select the Go screen button. A map screen, with
the destination marked, will appear.
9. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
10. Select the Start Guidance screen button. You are
now ready to start your route.
See "Point of Interest (POI)" under Destination on
page 2-13 for more information.
1-9
Advertisement
