Table of Contents
Advertisement
Resetting the factory default
settings
The "factory default" setting is used to
reset the various settings back to the
default status.
You can then select whether you want
to reset All settings back to the factory
default settings (Timer, Steam system,
Lighting, System lock, Water hardness,
Display, the most recently selected
type of coffee and all the Standard User
profile settings), or to delete the User
profiles.
^ Select "Settings F" from the Main
menu, and then touch the OK sensor.
^ Use an arrow sensor to highlight
"Factory default", and then touch the
OK sensor.
Various options will then be available:
All settings
This option sets "All settings" back to
the factory default.
^ Select "Reset" under "All settings",
and touch the OK sensor.
All settings are then reset to the default.
If you select "Reset" by
mistake, switch the coffee
machine off: Resetting to the
factory defaults will not be carried out.
Settings: Customising your machine
Factory default settings (the coffee
machine is delivered with the
following settings)
– Steam system (On)
– Time of day display (On for 60
– Lighting: Brightness (medium)
– Safety: System lock (Off)
– Water hardness (Very hard 4)
– Display: Display - Contrast (medium),
– Volume: Volume of buzzer tones and
– User profile: Revert (when switched
– Allocate type (of coffee):
seconds),
Clock format (24 h),
Timer - Switch on at (12:00),
Timer - Switch off after (1:00),
Timer - Switch off at (12:00),
(Switch on at and Switch off at are
both deactivated)
Brightness (maximum)
keypad tone (maximum setting for
both)
on).
Chamber 1 = Volluto
Chamber 2 = Arpeggio
Chamber 3 = Cosi
Chamber 4 = Roma
Chamber 5 = Decaffeinato
33
Advertisement
Table of Contents
