Advertisement
Quick Links
Quick Installation Guide for IMAGO camera models:
ICN-11P1 NW 2.8
ICN-11P1 NW 2.8 W
ICN-31P1 NW 2.8
ICN-31P1 NW 2.8 W
Thank you for purchasing the Imago IP Camera. For its correct installation, follow this short instruction and user
manual. You will thus contribute to the smooth operation and long life of the camera. If you have any questions
during the installation or use of the product, contact the technical support of your supplier.
Package contents
•
Camera
•
Camera bracket
•
Drill template
•
Set of wall plugs (ø 6 mm) and screws
•
Ethernet cable
•
CD with recording software iVMS-4200, Camera Installation Wizard
Fig. 1: Package contents
1
IMAGO ICN-x1P1 NW 2.8 (W) – Quick Installation Guide
www.imago-video.com
Advertisement
Related Manuals for IMAGO ICN-11P1 NW 2.8
Summary of Contents for IMAGO ICN-11P1 NW 2.8
- Page 1 ICN-31P1 NW 2.8 W Thank you for purchasing the Imago IP Camera. For its correct installation, follow this short instruction and user manual. You will thus contribute to the smooth operation and long life of the camera. If you have any questions during the installation or use of the product, contact the technical support of your supplier.
- Page 2 IMAGO ICN-x1P1 NW 2.8 (W) – Quick Installation Guide Notice • The camera should be stored in a dry environment • Do not turn on the camera and do not work with voltage in a humid environment • Do not install cameras in a high humidity environment •...
- Page 3 IMAGO ICN-x1P1 NW 2.8 (W) – Quick Installation Guide Fig. 2: Dismantled camera bracket Fig. 4 Mounting the camera to the Fig. 3 Mounting the camera to the bracket bracket The first access to the camera • After connecting the camera to the power supply and the data network the camera can be accessed via a web browser;...
- Page 4 IMAGO ICN-x1P1 NW 2.8 (W) – Quick Installation Guide • Double click on the found camera to open setting basic network parameters of the camera according to the configuration of your network environment, enter the password for the user "admin" set in the camera, and save by pressing the "Confirm"...