Table of Contents
Advertisement
7. Continue to cut more into the tree until the tree/
branch bends and the tension is released.
8. Cut the tree/branch from the opposite side of the
bend, after the tension is released.
To use the product in cold weather
CAUTION:
cause operation problems. Risk of too low
engine temperature or ice on the air filter
and the carburetor.
1. Clothe a part of the air intake on the starter. This
increases the engine temperature.
2. For temperatures below 0°C/32°F, turn the plug in
the cylinder cover.
3. For temperatures below -5°C/23°F or in conditions
with snow, a winter cover (A) and a winter plug (B)
are available. Assemble the winter cover (A) with the
winter plug (B) on the starter housing. The winter
cover decreases the flow of cool air and keeps snow
away from the carburetor space.
B
A
1533 - 001 - 22.01.2021
Snow and cold weather can
CAUTION:
cover if the temperature increases above
-5°C/23°F. Risk of too high engine
temperature and damage to the engine.
Heated handles (346XPG, 353G)
The front and rear handles have electrical heating coils.
A generator supplies power to the heating coils.
Push the switch in the direction of the arrow to engage
the function. Push the switch in the opposite direction to
disengage the function.
Electrical carburetor heating (346XPG, 353G)
Adjustment of the carburetor heating is done electrically
through a thermostat. This keeps the correct carburetor
temperature and prevents ice in the carburetor.
Remove the winter
21
Advertisement
Table of Contents
