Projector Exterior View - BenQ Home Entertainment Series User Manual

• Avoid leaving the remote control and batteries in an excessive heat or humid environment like the kitchen,
bathroom, sauna, sunroom or in a closed car.
• Replace only with the same or equivalent type recommended by the battery manufacturer.
• Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for
your region.
• Never throw the batteries into a fire. There may be danger of an explosion.
• If the batteries are dead or if you will not be using the remote control for an extended period of time, remove the
batteries to avoid damage to the remote control from possible battery leakage.

Projector exterior view

1
9
8
2
3
4
5
4
10
4
1. Zoom ring/Focus ring
2. Vent (air inlet)
3. Projection lens
4. Adjuster feet
5. IR remote sensor (front)
6. External control panel
See Controls and functions on page
7. IR remote sensor (top)/Ambient light sensor
8. Speakers
9. Vent (air outlet)
10. Ceiling mount holes
11. Anti-theft security bar
8 Introduction
6
7
2
8
11
4
12. Audio input jack
(Only works when the projector input
source is set to HDMI, and is connected to
a DVI device via a DVI cable with a
DVI-to-HDMI adapter.)
Audio output jack
13. RS-232 control port
14. USB 2.0 Type-A port (2.5 A power supply,
9.
Firmware upgrade)
15. HDMI input ports (Version 2.0b)
16. SPDIF audio output port
17. AC power jack
18. Kensington anti-theft lock slot
12 13 14 15
17
16
18