Advertisement
Descriptions
MX-7
Passive 7-Channel VHF Separator-Combiner
12 channel range
54-216 MHz
(TV 2-13)
Separator enables
selection of up to
7 non-adjacent
VHF channels (3
low-VHF and 4
high-VHF channels)
from multiple off-air
TV antennas for best pic-
ture quality mix-and-match
system flexibility
Combiner mixes up to 7 non-adjacent
VHF channels (3 low-VHF and 4
high-VHF channels) from single
channel off-air antenna sources into a
composite output for headend insertion
10dB per channel attenuation control
provides easy level balancing
Low 2.5dB insertion loss provides
optimum carrier-to-noise for
improved picture quality
Compatible with both analog and dig-
ital signals to provide format flexibility
Factory custom-tuned for quick and
easy installation saving time and money
Field re-tunable enables quick and
easy channels reconfiguration with
minimum test equipment
Cost effective solution for MATV and
SMATV applications
Compact wall-mount design requires
less space for easier installation
and servicing
4
Ph:800-421-6511
Rev. 04/03
MX-7
Passive 7-Channel VHF Separator-Combiner
The Pico Macom MX7 low loss 7-channel mixing network is an extreme-
ly cost effective splitting or combining network for use in smaller MATV and
SMATV systems. The user friendly and compact design facilitates easy
installation. Individual channel tuning and attenuator controls provide accurate
quick-and-easy setup or reconfiguration reducing system down time. The
MX7 used as a separator significantly reduces system harmonics when
used prior to a series of Pico Macom's XBS single channel strip amplifiers
or signal processors. The MX7 used as a combiner is the perfect filtration
system to be used when combining outputs from channel specific VHF
antennas before insertion into a cable system via Pico Macom's TA52
broadband amplifier, thus reducing harmonic distortions.
www.picomacom.com
Advertisement
