Page 1 This document and the information contained herein is CONFIDENTIAL to TWINE Solutions Ltd, and shall not be used, published, disclosed, or disseminated outside TWINE in whole or in part without TWINE’s consent. This document contains TWINE trade secrets. Reverse engineering based on any of the information in this document is prohibited.
Page 2: Table Of Contents
1.9.2 Regulations ......................9 1.9.3 Safety Notice Definitions ................9 1.9.4 Operating the TS-1800 ..................10 TS-1800 Operating Panel Button Definition and Functionality ..... 10 2.1.1 Definition ............................10 2.1.2 Functionality ......................11 Powering Up and Down ...................... 11 2.2.1 Powering Up ......................
Page 3 Setup and Measurement ....................99 Preparing the Card for Measurement ..............100 Customer Acknowledgement ..............103 Confidential TS-1800 Site Preparation Guide Page 3 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 4: Introduction
About the TS-1800 Twine’s TS-1800 is a unique and revolutionary textile dyeing machine offering on- demand Digital Thread Dyeing capabilities. You can set the TS-1800 to dye a single color, multiple colors, or gradient colors, as needed for your particular dyeing job.
Page 5: System Specifications
Introduction System Specifications The following are the System Specifications for the TS-1800: Parameter Specification Definition Digital Thread and yarn Dyeing System Dye Technology DST™ Twine Digital Ink™ (TDI) Certification CE, ZDHC and Intertek Pre & Post Treatment Integrated Yarn Loading System...
Page 6: Supported Color Spaces
RESULT IN DEGRADED PERFORMANCE. Supported Thread Types Since the TS-1800 supports many types of threads and thread thicknesses, it can be used to dye thread for sewing, embroidery, and knitting applications. A list of supported threads can be found in the Recommended Media List (RML).
Page 7: Ts-1800 Parts Overview
Introduction TS-1800 Parts Overview The following tables describe the different parts of the TS-1800, as shown in the diagrams. Figure 2: TS-1800 parts front view Part Description Dryer Cover Cartridge Cover Thread Feeding Unit Front Service Cover Electrical cabinet Cover...
Page 8: Safety Considerations
Disclaimer 1.9.1 It is the customer’s responsibility: To ensure that the TS-1800 is used for the purpose it was intended (see section  1.9.2 “Designated Purpose”) To ensure that all Twine instructions and guides are carefully and accurately ...
Page 9: Designated Purpose
Designated Purpose 1.9.2 The TS-1800 is deemed to be used for its designated purpose if it is used in accordance with its product documentation and within its performance limits. It is essential that only trained personnel be allowed to use this system because of the technical skills and fair level of English comprehension required.
Page 10: Operating The Ts-1800
Operating the TS-1800 2. Operating the TS-1800 Operating the TS-1800 and preparing it for dyeing involves the following main steps: Powering it up and down. (Section 2.2 “Powering Up and Down”) 2. Loading ink. (Section 2.3 “Loading the TS-1800 with Ink or Lubricant”).
Page 11: Functionality
Operating the TS-1800 2.1.2 Functionality The functionality of each of the TS-1800 panel buttons is summarized in the tables below. 2.1.2.1 Power Button Function Description Method Button Light Indication Power up Powering up the Short press Blue system Power down...
Page 12 Operating the TS-1800 Figure 5: Power button The TS-1800 powers up and performs its startup procedures. When it has completed its startup procedure successfully, the green Ready to Dye icon will appear on the upper right side of the operating panel (PPC) screen.
Page 13: Powering Down
Operating the TS-1800 2.2.2 Powering Down During normal operation there is no need to power down the system. The TS-1800 enters standby mode when not in use. However, it is necessary to power down the system during routine maintenance in order to replace or clean parts.
Page 14: Loading The Ts-1800 With Ink Or Lubricant
 Load ink in the following situations:   Before using the TS-1800 for the first time.  When the PPC displays a low ink level. The procedure for loading ink cartridges is the same for all of the above- ...
Page 15: Preliminary Steps
You can also check the status of the ink level in the maintenance/diagnostics screen on the PPC. IF THE TS-1800 IS CURRENTLY IN OPERATION, YOU MUST MAKE SURE THAT WASTE EMPTYING IS NOT IN PROCESS. IF THE TS-1800 IS NOT CURRENTLY OPERATING, SKIP TO STEP 2.3.2 BELOW.
Page 16: Loading An Ink Cartridge
Operating the TS-1800 Never open the cartridge cover while waste emptying is in process! 2.3.2 Loading an Ink Cartridge To load an ink cartridge, do the following: 1. Open the Cartridge cover.2. If there is an ink cartridge in the slot, remove it.
Page 17 When properly inserted, the LED indicator to the left of the ink cartridge will blink once. Figure 11: Ink cartridge loaded Close the cartridge cover. The TS-1800 will ask you to approve which TDI ink cartridge has been inserted. TS-1800 User Guide Page 17...
Page 18 Operating the TS-1800 Figure 12: Validate cartridge type Validate the cartridge ink by selecting the correct color and proceed with the Confirm button as shown in Figure 13. Relevant ink selection will be highlighted from the other ink options. Figure 13: Ink selection Ink loading begins and a progress bar appears on the PPC screen.
Page 19 Operating the TS-1800 Figure 14: Ink filling progress When the process is complete the LED indicator will turn off. The following message is displayed: Figure 15: Ink filling progress completed Push the OK button, open the cartridge cover, and remove the empty ink cartridge.
Page 20 Operating the TS-1800 The Waste icon in the Current Status section of the Maintenance screen will show a dotted gray outline for each empty waste cartridge slot (Figure 16). Figure 16: Waste Cartridge icon When promoted by a PPC message to insert the Waste cartridge, do so into an available slot.
Page 21 Operating the TS-1800 Figure 18: Slide waste cartridge into slot Figure 19: Empty waste cartridge inserted. Blue LED is ON. Close the cartridge cover. The Waste icon on the Current Status section of the Maintenance screen should show a green V check outline when a waste cartridge is inserted.
Page 22: Handling Waste
Operating the TS-1800 Figure 20: Waste cartridge icon marked inserted The ink is hazardous to humans. Follow the MSDS and local disposal regulations carefully when disposing of ink. 2.4 Handling Waste Byproducts of the dyeing process are automatically pumped into the empty ink cartridges in the waste cartridge slots.
Page 23 Operating the TS-1800 Filling completed. Never open the cartridge cover while waste emptying is in process! Open the cartridge cover. 2. Check the LED indicators on the left-hand side of the waste cartridges. Figure 22: Check LED status The LED indicator turns off when a waste cartridge is full.
Page 24 Operating the TS-1800 The LED indicator blinking once Figure 23: Empty waste cartridge inserted 5. Close the cartridge cover. The following message is displayed: Figure 24: close cartridges cover TS-1800 User Guide Page 24...
Page 25: Lubricant Filling
A lubricant bottle is included with the set of ink cartridges. Figure 26: Lubricant bottle To refill the lubricant: Open the TS-1800 operating panel (PPC) door. 2. Open the lubricant container cover by releasing the 2 lock screws. TS-1800 User Guide...
Page 26 Operating the TS-1800 Figure 27: Opening the cover 3. Use a complete 1-liter lubricant bottle to fill the lubricant as shown in Figure 28. Figure 28: Filling the lubricant 4. Close back the lubricant container cover. TS-1800 User Guide Page 26...
Page 27: Thread Loading Steps
2. If the Thread Loading process fails to complete, press the Reset Thread Loading button and wait for the process to end. The blue light on the Load button flashes slowly while the TS-1800 performs internal processes to prepare for thread loading.
Page 28 Operating the TS-1800 Figure 30: Reset Thread Loading NOTE: This process can take up to a few minutes to complete. When these processes are complete, the following message appears: Ready for Thread Insert The blue light on the Load button stops flashing and remains ON.
Page 29 Operating the TS-1800 Figure 31: Undyed thread in the TGU To feed the thread through the TGU path, follow the corresponding numbered steps in the image and in the procedure below. TS-1800 User Guide Page 29...
Page 30 Operating the TS-1800 THE STEP NUMBERS USED IN THE IMAGE AND THE PROCEDURE CORRESPOND TO THE NUMBERS PRINTED ON THE TS-1800. Figure 32: Wind the thread as shown Clip the thread into the first thread guide lock as shown in Figure 33 (1).
Page 31 Operating the TS-1800 Feed the thread through the BTSR wheel by turning it 3 times around the wheel as shown in figure 35 (4). Feed the thread through the BTSR top hook (5). Feed the thread through the top retaining ball (6).
Page 32 Operating the TS-1800 Figure 35: Feed the Thread through the BTSR tensioner and BTSR wheel Open the top two covers: Figure 36: Opening the two top covers TS-1800 User Guide Page 32...
Page 33 Operating the TS-1800 10. Open the Arc Cover by releasing the lock screw and pull the cover up Figure 37: Open the Arc cover lock screw 11. Open the Dyeing tunnel by opening the 3 latches and lifting the dyeing head cover.
Page 34 Operating the TS-1800 Figure 39: Open upper door of dryer Make sure the thread is guided below the bearing wheel as shown in Figure 40. Figure 40: Guiding the thread below the bearing wheel 13. From the Dryer exit point (1) feed the thread through the Gripper unit (2) 14.
Page 35 Operating the TS-1800 Figure 41: Thread guided through the lubrication system The completed thread guiding path at the LTFU is shown below. Figure 42: LTFU thread guiding path Feed the thread through the upper retaining ball (1). Feed the thread through the two pink holes of the tensioner (2).
Page 36 For instructions on how to do this, refer to section 2.7: “Inserting an Empty Cone”. Press the Load button on the machine panel. The TS-1800 performs automatic thread loading. When it has completed the process, it is ready to start a new job and the following message displays:...
Page 37: Inserting An Empty Cone
Operating the TS-1800 Inserting an Empty Cone A new cone should be inserted when: Loading thread for the first time  The cone fills up  You want to start a new color on a new cone  To insert a new cone: Starting at the wider end of a new collecting cone, feed the thread through the inside of the cone.
Page 38: Replacing The Thread
Operating the TS-1800 Make sure that the end of the thread is protruding from the small end of the cone. Figure 45: Inserting the cone into the winder Feed the thread through the hook on the winding arm. Cut off the end of the thread protruding from the small end of the cone.
Page 39 Operating the TS-1800 Using a pair of scissors, cut the existing thread just after the feeding cone. Figure 46: Cutting the thread at the feeding cone Remove the current feeding cone. Place a full feeding cone into the thread feeding unit.
Page 40 Operating the TS-1800 Figure 48: Hold the threads together and wrap them around your hand Figure 49: Pass the two ends through the inside of the loop Figure 50: Remove your hand TS-1800 User Guide Page 40...
Page 41 Operating the TS-1800 Figure 51: Pull on each side to form a small knot Figure 52: Cut the excess thread after the knot Figure 53: Pull on the two ends to make sure that the knot is strong You can now proceed with the remaining steps of the procedure.
Page 42 Operating the TS-1800 On the panel, press and hold the Jog button until the knot appears at the collecting cone. Figure 54: Thread jog button Cut the thread past the knot, near the winder. Figure 55: Cutting the thread at the winder To release the current collecting cone, refer to section 2.9 “Releasing the...
Page 43: Releasing The Current Collecting Cone
Operating the TS-1800 Releasing the Current Collecting Cone To release the existing collecting cone: Unwind some of the thread on the collecting cone to create some slack in the thread. To release the collecting cone, hold the cone with your left hand and, using your right hand, firmly pull the spring-loaded cone support arm in the direction shown in Figure 56.
Page 44 Operating the TS-1800 Figure 57: Cutting the thread at the winder Cut the thread. Remove the current collecting cone. Store or reuse the current collecting cone. To insert an empty or a new collecting cone, refer to section 2.7: “Inserting an Empty Cone”.
Page 45: Home Screen & Menu
The following sections describe how to operate the TS-1800 using screen layout, menus, as well as how to manage the job list. Using the Home Screen The home screen of the TS-1800 shows a list of previously created jobs which includes: Name – The name of the Job ...
Page 46: Using The Main Menu
Home Screen & Menu The TS-1800 status icon is shown on the top right side of the screen and indicates the current condition, as seen in the following figure: Figure 59: TS-1800 State Using the Main Menu To open the main menu, select the menu icon in the top left corner of the home screen.
Page 47 Home Screen & Menu Figure 60: TS-1800 Main Menu TS-1800 Site Preparation Guide Page 47 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 48: Creating A New Job
Creating a New Job 4. Creating a New Job A Job is a sequence, or a unit of work, set up to be run by the TS-1800. The job consists of feeding the thread/yarn into the machine and dyeing it the specified color(s).
Page 49: White Gap (Spacing)
When dyeing more than one segment on a spool, you have the option of leaving some white space in between the colored segments. TS-1800 Site Preparation Guide Page 49 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 50: Color And Length
Figure 64: Color and Length The Color Selection Tool screen opens. The following tabs are used to define the color(s): TS-1800 Site Preparation Guide Page 50 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 51 Default preferences can be set if you tend to use the same job type and/or color space/catalog for each job. For more information, see Job Settings. TS-1800 Site Preparation Guide Page 51 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 52: Adding A Solid Color(S)
Enter the color coordinates or choose a catalog sample depending on the color space or catalog defined when creating the job. TS-1800 Site Preparation Guide Page 52 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 53 Figure 67: Enter the color coordinated in Color Selection Tool Click “Add New Segments” as needed for the job. TS-1800 Site Preparation Guide Page 53 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 54 Creating a New Job Figure 68: adding several segments to the job Edit the new segment parameters, Length & Color TS-1800 Site Preparation Guide Page 54 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 55 Figure 69: Editing segment #2 parameters Once the new segment is approved, the Job Summary screen appears as shown in figure 70. TS-1800 Site Preparation Guide Page 55 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 56: Editing A Solid Color(S)
2. Then to edit the color segment, change the color coordinates or choose a catalog sample depending on the color space or catalog you defined when creating the job. TS-1800 Site Preparation Guide Page 56 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 57 – Segment 1 (2), shows the new color option following the new LAB parameters. Figure 72: Editing a solid color TS-1800 Site Preparation Guide Page 57 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 58: Unsupported Color(S)
Creating a New Job 4.2.3 Unsupported Color(s) In a case where the selected color is out of the TS-1800 supported color gamut, the TS-1800 will offer a “Best Match” for the unsupported color. To use the “Best Match color for dyeing, select OK in the Color Selection Tool.
Page 59: Selecting Color From A Catalog
To select a color from one of the pre-uploaded catalogs, complete the following steps: Select the Catalog color space from the tabs. Select a catalog from the list. TS-1800 Site Preparation Guide Page 59 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 60 The selected color will appear bigger (Figure 77). TS-1800 Site Preparation Guide Page 60 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 61: My Colors Libraries
3. Once a color has been added, the heart icon will appear filled in (1) to label the color as added to a color library. TS-1800 Site Preparation Guide Page 61 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 62 80. Click on the requested color to load. TS-1800 Site Preparation Guide Page 62 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 63: Edit My Color Libraries
3. To make changes to a color name, next to the library name, select the Edit icon. TS-1800 Site Preparation Guide Page 63 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 64 To delete a color, select the Delete icon in the center of the color. Figure 82: Delete Color from My Color Libraries TS-1800 Site Preparation Guide Page 64 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 65 6. To create a new library, select [+] Add Group. Figure 84: Add Group to My Color Library TS-1800 Site Preparation Guide Page 65 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 66: Creating A Color Gradient
Select the [+] button in the middle of the first solid color. Figure 86: Adding a second color to create a gradient TS-1800 Site Preparation Guide Page 66 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 67 Drag the arrows under the color bar to define the color transition length between the two colors. TS-1800 Site Preparation Guide Page 67 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 68: Color Fine Tuning Tool
Color Fine Tuning Tool The color fine-tuning tool is used for color correction after dyeing. First dye the thread with the TS-1800, then use the spectrophotometer (or colorimeter) to measure the output color by extracting the LAB values of the color.
Page 69 Trails Log- The measured LAB values, the matching recipe and the  between targets and measured LAB values are documented in the trails log. TS-1800 Site Preparation Guide Page 69 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 70 In the Trails Log section, select the Trail Number needed for the job, then select Apply. The selected color recipe will become the job color. TS-1800 Site Preparation Guide Page 70 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 71: Job Summary
The duration in minutes for the entire job  The option to repeat the same job as many times as needed  TS-1800 Site Preparation Guide Page 71 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 72: Advanced Segments Management
100m solid RGB  150m gradient CMYK  400m solid LAB  Figure 93: Example Job Creation Template .xlsx: TS-1800 Site Preparation Guide Page 72 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 73 Thread Type – Select from the list of thread types, e.g., QTT  Once the parameters are completed, select Import.  TS-1800 Site Preparation Guide Page 73 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 74: Segment Management
Reverse – reverse the order of the selected segments  Repeat – repeat the selected segments  TS-1800 Site Preparation Guide Page 74 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 75 Add specific segments to manage by selecting the Checkbox next to each Segment. To include all the segments, select the Checkbox next to Select All. TS-1800 Site Preparation Guide Page 75 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 76 To define the number of times to repeat a group of colors, edit the Number next to the group. To ungroup a group of segments, select Ungroup. TS-1800 Site Preparation Guide Page 76 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 77: Managing The Job List
To search for a specific job, enter the name of the job, or customer, in the Search Box. TS-1800 Site Preparation Guide Page 77 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 78  To edit a job, select EDIT. Otherwise select DYE. Figure 101: Options for Managing Dye Job TS-1800 Site Preparation Guide Page 78 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 79: Update
A notification appears when updates are available. Follow the on-screen prompts to install the updates. Figure 102: Software update screen TS-1800 Site Preparation Guide Page 79 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 80: Maintenance
Maintenance 6. Maintenance Maintaining your TS-1800 is important for best performance and long life of the machine. The maintenance procedures are done by the operator through the Maintenance menu. To access the maintenance menu, tap on tab at the right side of the screen and then on Maintenance.
Page 81 Thread Loading: Wizard system for thread loading assistance  Thread Loading Wizard  New Thread Wizard  Reset Thread Loading  TS-1800 Site Preparation Guide Page 81 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 82 Handling the Waste Cartridge Figure 107: Guides Dyeing counters showing:  Total Dye Time   Total Dye Meters TS-1800 Site Preparation Guide Page 82 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 83: Cleaning The Dyeing Head V Groove
Remove the two upper covers, both the white and gray covers. Figure 109: Opening covers to clean V groove Manually open the Arc dyeing head cover. TS-1800 Site Preparation Guide Page 83 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 84 Figure 111: Dispensing V Groove cleaning liquid In the Dispense Cleaning Liquied window, click Start. TS-1800 Site Preparation Guide Page 84 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 85 Figure 113: Cleaning the dyeing head Return the machine covers to their original locations. TS-1800 Site Preparation Guide Page 85 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 86: Cleaning The Dryer Inner Mesh Filters
Figure 114: Pulling out the ring filter Pulling out the rear filter Figure 115: Dryer Rear Filter TS-1800 Site Preparation Guide Page 86 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 87 The rear filter can be pulled out of the dryer when its lower corners meet the releasing slots of the filter rails. Figure 118: Filter corners and releasing slot TS-1800 Site Preparation Guide Page 87 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 88: Cleaning The Dyeing Head
To access the guides, tap on the procedure you want to perform. TS-1800 Site Preparation Guide Page 88 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 89: Cleaning The Lubrication Tunnel
If the lubrication tunnel requires cleaning, use a cloth soaked with IPA or 99% ethanol to clean the tunnel until there are no ink residuals. Figure 121: Lubrication tunnel TS-1800 Site Preparation Guide Page 89 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 90: Replacing The Carbon Filter
Figure 122 Opening the lower front cover b. Open the Waste Handling System front door by hand. Figure 123: Opening the WHS door TS-1800 Site Preparation Guide Page 90 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 91 Install the new carbon filter a. Remove the filter from the box. b. Make sure the filter handle is up. TS-1800 Site Preparation Guide Page 91 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 92 Figure 127: Installing the carbon filter d. Close the Waste Handling System front door. e. Close the lower front cover. TS-1800 Site Preparation Guide Page 92 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 93: Preventive Maintenance (Pm) Table
To correct this error, make sure the collecting cone is properly attached to the winder shaft. Figure 128: Collecting Cone out of place TS-1800 Site Preparation Guide Page 93 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 94 Maintenance All parts of the TS-1800 can be cleaned using one of the following materials: ISO PROPYL ALCOHOL TECH Grade  ETHANOL 99.9% TECH Grade  WARNING When cleaning the system, the user must wear the safety gloves and goggles that were supplied with the system.
Page 95: Appendix A: Technical Specification
Maximum sound level: 65 dB  Safety Hazards The following table indicates the specific safety hazards that you might encounter during the operation of the TS-1800 system. TS-1800 Site Preparation Guide Page 95 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel...
Page 96 Removing Covers Before removing the electric cabinet, cover and opening the electric cabinet door: 1.: Power down the TS-1800 by pressing and holding the power button on the panel. Turn off the main power switch at the wall socket. Disconnect the plug from the wall socket.
Page 97 Find out where the Emergency power button (EMO) is located. It is strictly prohibited to put your hands near any rotating part while it is operating. If it is necessary to clean, maintain, or repair these parts, turn off the TS-1800 and unplug it first.
Page 98 When handling spilled ink from a cracked or dropped cartridge, wear proper clothing, gloves, and safety goggles to avoid contact with skin. Skin Irritation TS-1800 Site Preparation Guide Page 98 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 99: Appendix B: Color Measurement Guidelines And Specification
Appendix B: Color Measurement Guidelines and Specification 8. Appendix B: Color Measurement Guidelines and Specification At Twine, the Datacolor 850 spectrophotometer is used to measure color samples. The spectrophotometer is constantly calibrated, and performance ® is monitored via the DataColor Guardian service.
Page 100: Preparing The Card For Measurement
TS-1800 Site Preparation Guide Page 100 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 101 The spectrophotometer requires the following four measurements: 2 x vertical measurements  2 x horizontal measurements  Figure 131: Vertical and Horizontal Measurements TS-1800 Site Preparation Guide Page 101 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 102 L*a*b target value 2. L*a*b measured value (average) 3. ΔΕ CMC result Figure 133: The ΔΕ CMC View Panel TS-1800 Site Preparation Guide Page 102 Hatnufa 7, Kiryat Arie, Petach Tiqva, 4951025, Israel P.O. Box 3391 | +972 3 5589505/606 | twine-s.com...
Page 103: Customer Acknowledgement
In the event that such charges are incurred by Twine, the undersigned will reimburse Twine for any costs actually incurred by Twine.

Twine TS-1800 User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Twine TS-1800

Summary of Contents for Twine TS-1800

Table of Contents