Table of Contents
Advertisement
SETTING THE DELAY TIME
Factory setting:
2 s
▸
Select
in the main menu
Drive Mode
▸
Select
Multi-Shot
▸
Select
Self Timer
▸
Select the desired setting
(
,
,
)
Off
2 s
12 s
MOTION ARTEFACTS CORRECTION
As multiple shots are taken in series, any movement in the frame can
result in ghost images. These artefacts are automatically corrected
in factory settings. This function can also be deactivated to increase
camera performance.
Factory setting:
On
▸
Select
in the main menu
Drive Mode
▸
Select
Multi-Shot
▸
Select
Motion artefacts correction
▸
Select
/
On
Off
Notes
• A multishot images will not be created if motion artefacts correc-
tion fails. The "standard" DNG image will, however, remain intact.
• A deactivation of the motion artefacts correction can further im-
prove image sharpness for completely immobile objects.
• This function is not available in conjunction with APS-C lenses and
in some cases with some lenses attached via adapter.
• The following limitations apply when using
time ≤ 1 s, aperture value ≤ F16, ISO value ≤ 3200.
• The electronic shutter function is always used for multishot shoot-
ings. The multishot function remains deactivated when the
is set to
.
Type
Mechanical
• Multishot shootings are not possible if a flash is used.
• The multishot function creates very large image files. Sufficient
storage space on the memory card is essential.
• The message
Vibration detected. Ensure a robust, level surface.
appears in the display if the camera-internal sensors detect move-
ment.
PHOTOGRAPHY ▸ SHOOTING MODES
: Exposure
Multi-Shot
Shutter
151
Advertisement
Table of Contents
