Asus ROG PHONE 6 User Manual page 10

Installing a nano SIM card
Both nano SIM card slots support GSM/GPRS/EDGE, WCDMA/HSPA+/DC-HSPA+, FDD-LTE, TD-LTE,
and 5G NR Sub-6 network bands.
CAUTION! Be extra careful when handling a nano SIM card . ASUS is not responsible for any data loss or
damage incurred to your nano SIM card(s).
To install a nano SIM card:
1. Push the bundled eject pin into the hole on the card slot to eject the tray out.
2. Place the nano SIM card(s) in the card tray.
3. Gently push the tray back in until it's securely closed.
NOTES:
• Both Nano SIM card slots support GSM/GPRS/EDGE, WCDMA/HSPA+/DC-HSPA+, FDD-LTE, TD-LTE, and 5G
NR Sub-6 network bands. Both Nano SIM cards can connect to VoLTE (4G Calling) service. But only one
can connect to 5G NR Sub-6 data service at a time.
• Actual network and frequency band usage depends on network deployment in your area. Contact your
telecom carrier if 5G NR Sub-6 support and VoLTE (4G Calling) service are available in your area.
CAUTION!
• Do not use sharp tools or solvent on your device to avoid scratches on it.
• Use only a standard Nano SIM card on your ROG Phone.
10
Chapter 1: Basics