Rf Output Connections; Front Panel Operations - Pico Macom PFR-2 Owner's Manual

PICO MACOM
Example of a fiber cable cleaner (source: Fiber Instrument Sales, www.fiberinstrumentsales.com)

4.3 RF Output Connections

Connect an RF output coax cable to a rear panel F-connector labeled RF OUT and route to
combiners, transmitters or other equipment which use the RF signal. Install a second for the
PFR-2 and up to 4 for the PFR-4, if desired.
You may monitor each output signal from the rear panel test port. The PFR includes a
-20 dB directional coupler to divert a small amount of the signal from the primary RF OUT to this
output. The -20 dB level is approximate and varies due to parts variations.
5.

Front Panel Operations

The PFR has one user adjustment per RF output, the RF ADJUST on the front panel.
CATV ROOM OPTICAL RECEIVER
RF OUT 2 RF OUT 1
CONTACT US 858.546.5050
POWER
PFR front panel
OPTICAL POWER DISPLAY
POWER -5dBm -3dBm -2dBm -1dBm 0dBm 2dBm
PFR front panel detail
LOC IN
ON/OFF
Fiber Optic
OPTICAL POWER DISPLAY
-5dBm -3dBm -2dBm -1dBm 0dBm 2dBm
VAR EQL VAR ATT
LOC IN
90-264 VAC
ON/OFF
VAR EQL VAR ATT
47-63
90-264 VAC FUSE FUSE
www.picomacom.com
Series
47-63
FUSE FUSE
11