Table of Contents
Advertisement
10.4 Liquid or powder detergent
1.
B
3.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash phase.
• Do not set the delay start.
10.5 Setting a programme
1. Turn the programme knob and set the
programme:
• The indicator
• The display shows the level of the
Time Manager, the programme
duration and the indicators of the
phases of the programme.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something
incorrect, the display shows
the message
flashes.
.
A
2.
4.
10.6 Starting a programme
without the delay start
Press
.
• The indicator of
and stays on.
• The indicator
the display.
• The programme starts, the door
locks, the display shows the
indicator
• The drain pump can operate for a
short time when the appliance fills
water.
ENGLISH
stops to flash
starts to flash on
.
13
Advertisement
Table of Contents
