14. TECHNICAL DATA..................24 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and • disconnect the mains plug from the mains socket.
ENGLISH • Before you connect the appliance to • Do not put a container to collect new pipes or pipes not used for a long possible water leakage under the time, let the water flow until it is clean. appliance. Contact the Authorised •...
ENGLISH 4.2 Display A. The Temperature area: • : the washing phase : Temperature indicator • : the rinses phase : Cold water indicator • : the spin phase : Time Manager indicator. • : the Extra rinse permanent C. The time area: option.
Page 8
Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed 3 kg Synthetic items or mixed fabric items. Normal 1200 rpm soil. Syntetiké 60°C - Cold 3 kg Delicate fabrics as acrylics, viscose, polyest‐...
Page 9
ENGLISH Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed 1 kg Synthetic and mixed fabric items. Light soil and 800 rpm items to freshen up. Krátký 30°C 1) Standard programmes for the Energy Label consumption values. According to regu‐ lation 1061/2010, these programmes are respectively the «Standard 60°C cotton pro‐...
Programme Krátký ■ ■ ■ 1) Set the spin speed. Make sure it agrees with the laundry. If you set No Spin option the only drain phase is available. 6. CONSUMPTION VALUES The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient tempera‐...
ENGLISH Off Mode (W) Left On Mode (W) 0,48 0,48 The information given in the chart above are in compliance with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC. 7. OPTIONS • The rinse phase uses more water for 7.1 Teplota some washing programmes.
The appliance decreases the spin speed, uses more water and adapts the In‐ programme duration to the type of di‐ laundry. ca‐ The related indicator comes on. ■ ■ ■ ■ ■ ■ 7.7 Time Manager ■ ■ ■...
ENGLISH 9. BEFORE FIRST USE 1. Put 2 litre of water in the detergent 3. Set and start a programme for cotton compartment for washing phase. at the highest temperature without This activates the drain system. laundry. 2. Put a small quantity of detergent in This removes all possible dirt from the the compartment for washing phase.
Page 14
10.4 Liquid or powder detergent • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then the maximum level.
Page 15
ENGLISH 10.9 Interrupting a programme • The indicator of stops to flash and changing the options and stays on. • The indicator starts to flash You can change only some options on the display. before they operate. • The programme starts, the door locks, the display shows the 1.
• You must drain the water to open the CAUTION! door. If the temperature and level To drain the water: of the water in the drum are too high, you cannot open 1. Press . The appliance drains the the door.
ENGLISH • Turn inside out multilayered fabrics, • Do not mix different types of wool and items with painted detergents. illustrations. • To help the environment, do not use • Remove hard stains. more than the correct quantity of • Wash with a special detergent heavy detergent.
Page 18
12.2 Descaling the drum. Make regularly a maintenance wash. To do this: If the water hardness in your area is high • Remove the laundry from the drum. or moderate, we recommend that you • Set the cotton programme with the...
Page 19
ENGLISH 12.6 Cleaning the inlet hose and the valve filter 12.7 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot.
ENGLISH 12.8 Emergency drain 0° C, remove the remaining water from the inlet hose and the drain pump. Because of a malfunction, the appliance 1. Disconnect the mains plug from the cannot drain the water. mains socket. If this occurs, do steps (1) through (9) of 2.
Page 22
• - The mains supply is unstable. WARNING! Wait until the mains supply is stable. Deactivate the appliance before you do the checks. 13.2 Possible failures Problem Possible solution The programme does Make sure that the mains plug is connected to the mains not start.
Page 23
ENGLISH Problem Possible solution The spin phase does Set the spin programme. not operate or the washing cycle lasts lon‐ ger than usually. Make sure that the drain filter is not clogged. Clean the fil‐ ter, if necessary. Refer to 'Care and cleaning'. Adjust manually the items in the tub and start the spin phase again.
14. TECHNICAL DATA Dimension Width/ Height/ Depth/ 595 mm / 850 mm / 450 mm / 490 Total depth Electrical connection Voltage 230 V Overall power 2200 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid parti‐...